Call Forward Settings - Toshiba Strata IPT User Manual

Notes:
• Call Forward Any Call and CF-Incoming line can be set simultaneously on a featurephone. This allows
incoming lines calls to be forwarded to a different destination than all of the other types of calls.
• Call Forward destinations can be to internal destinations and outside phone numbers.
• You can change your forwarding destination from outside the system using the DISA feature. See your
System Administrator for DISA phone numbers and security code access.

Call Forward Settings

• Call Forward All Calls – Forwards all calls immediately.
• Call Forward Busy/Do Not Disturb – Forwards calls immediately when your extension is busy
or in Do Not Disturb (DND) mode.
In Tone-first systems with multiple lines, Call Forward Busy forwards calls only when all line
appearances are in use. In Voice-first systems, Call Forward Busy forwards all calls any time your
featurephone is in use.
• Call Forward - No Answer – Forwards all calls to your station whenever you do not answer the
call within a designated time (set by you when you enable the feature).
• Call Forward Busy/Do Not Disturb/No Answer – Forwards all calls to your station whenever
you are busy, in the DND mode, or after ringing and you do not answer the call within a designated
time (set by you when you enable the feature).
• Call Forward Cancel – Cancels the set Call Forward feature. Notice that each category of Call
Forward has a different code for canceling.
Station Call Forward Procedures
Table 2, "Call Forward Procedure"
Forward function by, one, entering the button sequence as described, or two, by programming a
Flexible Button to perform the sequence. See
instructions on programming a Flexible Button.
To use the Call Forward button sequence
Follow the instructions in the following table, shown under "Button Sequence." Some features
require additional input, such as:
• Dest. Ext. or Phone No. – CF destination numbers can be internal extension numbers or outside
phone numbers. If the destination is an outside number, enter the access code used for dialling out
9
(such as ) + the phone number +
following examples).
• Timer – Enter the number of seconds (08~60) your phone should ring before forwarding the call.
(This is the CF-No Answer timer.)
STRATA IPT/DKT FEATUREPHONE USER GUIDE
contains Call Forward Button sequences. You can do a Call
"Programming Feature Buttons" on page 95
#
. The CTX accepts destination numbers of up to 32 digits. (See
Toshiba Business Communications Division
for
49 of 124