Advertisement
Tractor Stack Valve Modifications S/N 398796 & Down
Tractor Stack Valve Hose
Connections:
(continued)
7.
Stack Valve to Control Valve Hose Routing.
The Hoses from the Stack Valve, Note LH reference
is from sitting in Tractor Seat Looking forward.
A.
The Pressure "P" Port Hose from
Tractor Stack Valve to the "IN" side of the Filter. This
Filter is the smaller canister Filter mounted on the
LH side of Tank (See Figure 25). The Hose on the
"OUT" side of Filter will run to the "P" Port of Control
Valve.
B.
The Return "T" Port Hose will run
direct from the Stack Valve of Tractor to the "T" Port
of Control valve (See Figure 26).
C.
The Load Sense Hose runs from the
Tractor Stack Valve to the Lower LH side of the
Control Valve (See Figure 26). This will be an
Elbow fitting coming out of the Lower Valve End
Plate next to the "P" Port opening. If the Valve does
not have this Load Sense Port, Check to make sure
the Valve is a Load Sense Type.
D.
Hose routing Schematic. For Hose
Routing Stack valve to Control Valve (See Figure
23 & 26).
8.
Reinstall Slow Moving Vehicle Sign. Rein-
stall the Tractors Slow Moving Vehicle Sign, the
Slow Moving vehicle Sign is not furnished as part of
the Machete Components. Sign should be on Trac-
tor as part of Tractor Equipment (See Figure 24).
Load
Sense
Hose
Figure 23
Machete (JD -62,63,6420 Asy Man) 10/04
© 2004 Alamo Group Inc.
"P" Port
Hose
"T" Port, Tank
Return Hose
Section 5 - 8
Pull Hoses Under
Cab Floor
Figure 21
Figure 22
Figure 24
Advertisement
