Advertisement
Mount Kit Component Identification
10
Item
Part No.
1.
02978468
02978469
3.
------------
4.
02725900
5.
02974704
6.
02966321
02966556
7.
02030300
8.
02975738
002528
9.
02971158
10.
00679800
Note:
Item 3 is welded to both LH and RH Frame Rails from the factory. Item 4 will be welded on during
assembly procedures. Do not weld on any components until instructed to do so, then check instructions
carefully because some components are only to be tack welded then removed to be welded later.
Actual Tube Design may vary from drawing above. Shown above is a general Frame Rail
Weldment. While Frame Rails may be designed different the mounting process will be the same.
3 Point Arm Stabilizers on tractor will have to be removed when mounting Frame rails remounted
under frame rail rear plates. If stabilizer need to be modified to remount them it will be customers
responsibility.
Machete (JD- 62, 63,6400 Asy. Man.) 10/04
© 2004 Alamo Group Inc.
Frame Rails & Axle Straps
4
Qty
Description
1
Frame Rail Weldment, LH (Shown)
1
Frame Rail Weldment, RH (Not Shown)
2
Rear Mounting Plate (Welded on LH and RH Frame Rail)
2
Support Plate (not welded to frame rail when received)
2
Axle Strap, Fit above Axle. (LH & RH side )
2
Bolt, Axle Strap Hex Head 1" - 11 NC X 12" PL
2
Bolt, Axle Strap Hex Head 1" - 11 NC X 11" Pl (RH Side)
4
Locknut, 1" - 11NC
6
Bolt, Hex Head M20-P1.5 X 70 mm GR 10.9 (LH Side)
6
Bolt, Hex Head M20-P1.5 X 110 mm GR 10.9 (RH Side)
8
Lockwasher, 20 mm
2
Hose Support Bracket Pigtail (Weld on Hose Support.
6
5
8, 9
1
3
10 -11
7
Advertisement
