Advertisement
Mount Kit Component Identification
John Deere 6120/6215/6220/6320/6415/6420 Cab/2&4wd
Closed Center, Load Sense Valve
13.6-24 Max Front Tire
18.4-30 Min Rear Tire
18.4-34 Max Rear Tire
Mount Kits:
Machete Mount Kit (JD6020 Tier II Models Only) ...................................02979115
Machete Mount Kit (JD6015 Models Only) .......................................... 02980647
Options:
Lexan Door Kit ............................................................................... 02973305
Side Screen Kit .............................................................................. 02966151
Rear Screen Kit ............................................................................. 02977499
Tier I Engine Pulley Adapter ............................................................. 02973992
Left Hand Valve End Plate Kit (See Notes Below) ...................................02980930
Extra Machete Installation Manual ..................................................... 02980007
Restrictions:
1.
Must be ordered with a high frame due to high opening hood design.
2.
Mount kit designed for right hand, thru-hood exhaust. A-post exhausts may interfere with the
boom and must be modified at the dealer/customer's expense.
3.
Until further notice, dealer/customer is responsible for providing any additional counterweight
needed for mounting a 24' boom.
4.
Wheel weights may not fit tractors with rack & pinion rear axles. Dealer/customer is responsible
for providing an adapter if necessary.
5.
A minimum 18.4-30 rear tire is needed to allow for proper installation of the 1400# wheel weight.
6.
The JD6015 series mount kit can be utilized for JD6020 series tractors by ordering seat
mounted joystick kit #02979110. Likewise, the JD6020 series mount kit can be used on the
JD6015 series tractors by ordering seat mounted joystick kit #02978157 and one each of
hydraulic fittings #01500058 & #02967150.
7.
Tractors equipped with 4wd may require a steering stop and/or articulation block - not included.
8.
A Lexan window insert can not be installed with the rear screen due to the glass curvature.
9.
Customers w/ JD6020 series tractors produced with Tier I engines prior to December 16, 2002
must order pulley adapter #02973992 & installation drawing #02977082 for proper driveline
compatibility.
10.
Effective January 2004, John Deere implemented a new rear remote valve on all 6015 & 6020
series tractors (See Figure 3). The right side of the valve is significantly different and can be
easily identified from its predecessor in the next figure. As a result, we are providing a new right
hand power beyond end plate kit #02980927 with each mount kit - effective April 2, 2004. For
tractors produced before January below serial #398797, you will need to order the old left hand
valve end plate kit #02980930 as a separate line item. Caution: The new valve end plate kit is
set up for tractors equipped with either a one or two spool remote valve. Tractors equipped
with three remotes (See Figure 5) or more will require longer end plate mounting studs - which
must be purchased from John Deere at the dealer/customer's expense.
Machete (JD- 62, 63,6400 Asy. Man.) 10/04
© 2004 Alamo Group Inc.
10 -2
As of Date: 4-19-02
Advertisement
