FUSE REPLACEMENT
•
If fuse failures occur frequently, it
circuit or an overload in the electrical system. See your
authorized KYMCO dealer for repair.
(1) Charge system fuse specification: 15A/50cc 7A
(2) Ignition
switch fuse specification: 10A/50cc 7A
(3) The spare fuse (3) is on the battery component.
• To prevent accidental short-circ
ignition switch before checking or replacing a fuse.
Fuse Re
placement
1. Rem
ove the battery cover by removing the screws (pg 44).
2. Op
en the fuse holders (1) and lift out the fuse with the clips (2).
3. Slide the old fuse out of the clips and discard.
usually indicates a short
uiting, turn off the
- 46 -