Fuse Replacement - KYMCO Vitality 50 Owner's Manual

(4) FUSE REPLACEMENT

When frequent fuse failure occurs, it usually indicates a
short circuit or an overload in the electrical system. See
your authorized KYMCO dealer for repair.
The fuse holder (1) is located in a compartment under
the battery cover.
The specified fuses are: 7A
The spare fuse (2) is on the battery compartment.
CAUTION:
To prevent accidental short-circuiting, turn off the
ignition switch before checking or replacing a fuse.
Fuse replace:
1. Remove the battery cover, by removing the screw.
(See page 48)
2. Open the fuse holders (1) and lift out the fuse with
the clips (2).
(1) (1)
(1)
(2)
(2) (2)