• This scooter
model comes with a battery that DOES NOT
require refilling of distill
• When cleaning the terminals, remove the scre
battery cover on the floo
If the battery terminals are corr
nd clean it.
fter cleaning, apply a thin coat of grease or Vaseline to the
attery terminals and then install the battery.
Never open the closed-type battery electrolyte cap.
The battery discharges electricity when the scooter is not
used for a long period of time. Remove the battery and
put it in a cool place after it is fully charged to prevent
• If the scooter will not be used for a long period o
remove the negative ( - ) terminal.
• Do no
t smoke or allow flames or sparks
while removing a
nd installing it.
Turn "OFF" the ignition sw
The negative ( - ) terminal should be removed first and
the positive ( + ) terminal should be installed first.
Tighten the loose terminal nuts securely.
ws attaching the
nd then open the battery cover.
oded, take the battery out
near the battery
itch before removal or
- 45 -