Download  Print this page

Operating Instructions; Ignition Switch & Handlebar Lock - KYMCO PEOPLE S 50 Owner's Manual

Hide thumbs



ON: In this position power is connected and you are able
to start the engine. The key cannot be taken out.
OFF: In this position, there is no power connected and the
engine will stop. The key can be taken out.
LOCK: In this position the handlebar is lock. The key
can be taken out.
Locking Method
The handlebar can be locked by turning the handlebar to the left as far as
possible. Push and turn the ignition switch key counter clockwise until
you reach the "LOCK" position.
Unlocking Method
Turn the ignition switch key clockwise until you reach the "OFF"
position. The "LOCK" will release automatically.
• To ensure that the scooter is locked, turn the handlebar
• While riding do not turn the ignition key to "LOCK",
this could result in a loss of control and accidents.
• Do not park your scooter in a place that blocks traffic.
- 8 -


Table of Contents

   Also See for KYMCO PEOPLE S 50

This manual is also suitable for:

People s 125People s 200People s 50

Comments to this Manuals

Symbols: 0
Latest comments: