Electric Starter Button; Headlight Switch - KYMCO PEOPLE S 50 Owner's Manual

ELECTRIC STARTER BUTTON

To start the engine the ignition switch must be turned to "ON".
Fully apply the front or rear brake lever to connect the power
and then push the electric starter button.
• To avoid engine damage do not push the electric
start button while the engine is running.
• Before using the electric start button be sure
that the headlight and turn signal switches are
in the "OFF" position.
• Release the electric start button immediately
after the engine has started.

HEADLIGHT SWITCH

In this position the parking light, headlights,
instrument lights and taillight turn off together.
In this position the parking light, instrument lights
and taillight are turned on.
In this position the parking light, headlight, instrument
lights and taillight are turned on.
- 9 -