Engine Starting Method; Turn The Ignition Switch "On; Lock The Rear Wheel - KYMCO PEOPLE S 50 Owner's Manual

5. ENGINE STARTING METHOD

T URN THE IGNITION SWITCH "ON"
• Unlock the steering handlebar.
• Turn the ignition switch to the "ON" position.
• Check the gasoline volume and engine oil levels be
starting the engine.
• Be sure that both the centre and side stan
starting the engine.

LOCK THE REAR WHEEL

• Apply the rear brake lever to connect power for starting.
• In order to prevent the scooter from rushing out from
underneath you at high speeds, mak
rear wheel.
• If there is excessive brake lever play, the bike may
experience loss of braking power.
fore
ds are up before
e sure you lock the
- 30 -