Electric Starter Button. Headlight/Hazard Switch - KYMCO B&W 150 Owner's Manual

(2) ELECTRIC STARTER BUTTON
To start the engine, first turn on the ignition switch and
then press the electric starter button. At this time, be sure
to fully apply the front or rear brake lever (pedal) in order
to connect the power.
CAUTION:
During engine running, do not push the electric starter
button to avoid engine damage.
Turn the headlight switch and turn signal switch "OFF"
before using the electric starter button.
Release the electric starter button immediately after the
engine is started.
(3) HEADLIGHT/HAZARD SWITCH
At this position, the position light, headlight, instrument
lights and taillight turn off together.
At this position, the position light, instrument lights
and taillight light turn on.
At this position, the position light, headlight, instrument
lights and taillight light turn on.
At this position, the front and rear right and left turn
signal lights flash together.
OFF
At this position, the front and rear right and left turn
signal lights go out together.
7