Starter Button; Headlight Switch/Hazard Switch - KYMCO ZX 50 User Manual

(2) STARTER BUTTON

To start the engine, first turn on the ignition
switch and then press the starter button. At this
time, be sure to fully apply the front or rear brake
lever (pedal) in order to connect the power.
CAUTION:
During engine running, do not push the starter
button to avoid engine damage.
Turn the headlight switch and turn signal switch
"OFF" before using the starter button.
Release the starter button immediately after the
engine is started.
(3) HEADLIGHT SWITCH/ HAZARD SWITCH
At this position, the position light,
headlight, instrument lights and taillight go
out together.
At this position, the position light, instrument
lights and taillight light together.
At this position, the position light, headlight,
instrument lights and taillight light together.
At this position, the front and rear right and
left turn signal lights wink together.
At this position, the front and rear right and
left turn signal lights go out together.
- 6 -