Electric Starter Button.headlight Switch - KYMCO Agility 50 Driver Manual

(2) ELECTRIC STARTER BUTTON (2) ELECTRIC STARTER BUTTON
To start the engine, first turn on the ignition switch and To start the engine, first turn on the ignition switch and
then push the electric starter button. At this time, be sure then push the electric starter button. At this time, be sure
to fully apply the front or rear brake lever (pedal) in order to fully apply the front or rear brake lever (pedal) in order
to connect the power. to connect the power.
CAUTION:
During engine running, do not push the electric starter During engine running, do not push the electric starter
button to avoid engine damage. button to avoid engine damage.
Turn the headlight switch off and turn signal switch off Turn the headlight switch off and turn signal switch off
before using the electric starter button. before using the electric starter button.
Release the electric starter button immediately after the Release the electric starter button immediately after the
engine is started. engine is started.
(3) HEADLIGHT SWITCH (3) HEADLIGHT SWITCH
At this position, the position light, headlight, instrument At this position, the position light, headlight, instrument
lights and taillight turn off together. lights and taillight turn off together.
At this position, the position light, instrument lights At this position, the position light, instrument lights
and taillight light turn on. and taillight light turn on.
At this position, the position light, headlight, instrument At this position, the position light, headlight, instrument
lights and taillight light all turn on. lights and taillight light all turn on.
－ － － －
6 6