Receiving and transmitting
Receiving and transmitting
Receiving and transmitting
Receiving and transmitting
Repeater operation
Repeater operation
Repeater operation
Repeater operation
Ask your dealer for details of the repeater's
programming.
➥ When the power is turned ON, the [PWR] i
lights green.
➥ The [TX]
[TX]
[TX]
[TX] and [BUSY]
[BUSY] indicators light simultaneously
[BUSY]
[BUSY]
while transmitting/receiving a signal.
• The [TX]
[TX] indicator lights red.
[TX]
[TX]
• The [BUSY]
[BUSY] indicator lights green.
[BUSY]
[BUSY]
4-3
Operation
[PWR] indicator
[PWR] i
[PWR] i
Base station operation
Base station operation
Base station operation
Base station operation
Receiving
Receiving
Receiving
Receiving
① Push [POWER]
[POWER] to turn power ON.
[POWER]
[POWER]
② Set the audio and squelch levels.
➥Rotate [SELECT]
[SELECT]
[SELECT]
[SELECT]
*1
fully counterclockwise in
advance.
➥Rotate [VOLUME]
[VOLUME] to adjust the audio output level.
[VOLUME]
[VOLUME]
➥Rotate [SELECT]
[SELECT]
*1
clockwise until the noise
[SELECT]
[SELECT]
disappears.
③ Push [CH Up]
[CH Up]
[CH Up]
[CH Up]
*2
or [CH Down]
[CH Down]
[CH Down]
[CH Down]
channel.
•When receiving a signal, the [BUSY]
green and audio is emitted from the speaker.
•Further adjustment of [VOLUME]
listening level may be necessary at this point.
*1
When the [SQL Level Up/Down] key function is
assigned to [SELECT].
*2
When the [CH Up]/[CH Down] key functions are
assigned.
Transmitting
Transmitting
Transmitting
Transmitting
① Take the microphone off hook.
② Wait for the channel to become clear.
③ Push and hold [PTT]
③ Push and hold [PTT]
[PTT] to transmit, then speak into the
[PTT] to transmit, then speak into the
[PTT]
[PTT]
[PTT]
[PTT]
microphone at your normal voice level.
④ Release [PTT]
[PTT] to receive.
[PTT]
[PTT]
IMPORTANT:
IMPORTANT:
IMPORTANT:
IMPORTANT:
To maximize the audio quality of the transmitted signal:
(1) Pause briefly after pushing [PTT]
(2) Hold the microphone 1 to 2 inch (2.5 to 5 cm) from
your mouth, then speak into the microphone at a
normal voice level.
*Some function available in analog base station mode
are not available in digital base station mode.
*2
to select the desired
[BUSY] indicator lights
[BUSY]
[BUSY]
[VOLUME] to a comfortable
[VOLUME]
[VOLUME]
[PTT].
[PTT]
[PTT]
30