Scan - Icom IC-FR5000 Series Sales Handbook

Secondary CH (Available when "Priority Scan" is Secondary CH
Secondary CH Secondary CH
selected in Scan Type Scan Type.)
Scan Type Scan Type
Select the desired channel as a secondary channel.
The selected channel is monitored during priority scan.
The secondary channel is lower priority than the
primary channel.
Disable Disable Disable Disable The secondary channel is not used.
Prio Prio- - - - A CH A CH The priority A channel is used as the
Prio Prio A CH A CH
secondary channel.
Prio Prio Prio- - - - B CH Prio B CH B CH B CH The priority B channel is used as the
secondary channel.
Start CH Start CH Scan start channel is used as the
Start CH Start CH
secondary channel.
CH Number CH Number CH Number CH Number The selected channel is used as the
Select Select Select Select secondary channel.
TX CH (Available when "Normal Scan" or "Priority Scan" TX CH
TX CH TX CH
is selected in Scan Type Scan Type Scan Type.) Scan Type
Select the desired channel as a transmission channel.
Last CH Last CH Last CH Last CH Transmission is performed in the last
busy channel. If thee is no busy
channel, the scan start channel is channel, the scan start channel is
selected for transmission.
Prio- - - - A CH Prio A CH Transmission is performed on the
Prio Prio A CH A CH
priority A channel.
Prio Prio- - - - B CH Prio Prio B CH B CH B CH Transmission is performed on the
priority B channel.
Start CH Start CH Transmission is performed on the
Start CH Start CH
scan start channel.
CH Number CH Number CH Number CH Number Transmission is performed on the
Select Select selected channel.
Select Select
Talk Back (Available when "Normal Scan" or "Priority Talk Back
Talk Back Talk Back
Scan" is selected in Scan Type Scan Type.)
Scan Type Scan Type
Select the talk back function ON or OFF.
If "Last CH" is selected in TX CH
available.
ON ON ON ON When transmission is performed within the
talk back timer time* (after the resume timer
has passed), the signal is transmitted on the
last busy channel.
OFF OFF OFF OFF Even if transmission is performed within the
talk back timer time* (after the resume timer
has passed), the signal is transmitted on the
channel that is selected in TX CH.
• Talk back timer is set in Talk Back (Sec)
Setting screen.

Scan

TX CH, this function is not TX CH TX CH
Talk Back (Sec) in the Scan
Talk Back (Sec) Talk Back (Sec)
TX Action TX Action (Available when "Normal Scan" or "Priority TX Action TX Action
Scan" is selected in Scan Type Scan Type Scan Type Scan Type.)
Select the scan condition when transmission is
performed during scanning.
Cancel Cancel Cancel Cancel Scan is canceled and transmission is
Scan Scan Scan Scan performed on the channel that is selected
in TX CH.
If Talk Back is turned ON and
transmission is performed within the talk
back timer time, the signal is transmitted
on the last busy channel.
Pause Pause Scan is paused until the signal
Pause Pause
Scan Scan Scan Scan disappears and then resumes after the
resume timer time* has passed.
* Resume timer is set in Resume (Sec)
screen.
Cancel CH Cancel CH (Available when "Normal Scan" or "Priority Cancel CH Cancel CH
Scan" is selected in Scan Type Scan Type Scan Type Scan Type.)
Select the desired channel type that is selected when
scan is cancelled (except for transmission.)
Start CH Start CH The scan start channel is selected
Start CH Start CH
automatically. automatically.
Start Start Start Start The scan start channel is selected
CH/Talk CH/Talk CH/Talk CH/Talk automatically when scan is canceled during
Back Back scanning.
Back Back
The last busy channel is selected
automatically when scan is canceled while
receiving a signal, or during scanning within
the talk back timer time (after the resume
timer has passed).
TX CH TX CH The channel that is selected in TX CH is
TX CH TX CH
selected automatically.
TX CH/Talk TX CH/Talk TX CH/Talk TX CH/Talk The channel that is selected in TX CH is
Back Back Back Back selected automatically when scan is
canceled during scanning.
The last busy channel is selected
automatically when scan is canceled while
receiving a signal, or during scanning within
the talk back timer time (after the resume
timer has passed).
Text Text
Text Text
Select the text indication capability from OFF, Text or
Start CH during scan.
OFF OFF The text indication is turned OFF.
OFF OFF
Text Text Text Text The text indication is turned ON. The
channel's text that is programmed in
Display Text as above is indicated during Display Text
Display Text Display Text
scan.
Start Start Start Start The text indication is turned ON. The scan
CH CH CH CH start channel's text is indicated during scan.
Resume (Sec) Resume (Sec) in Scan Setting Resume (Sec)
35