Page 2
UNIT UNIT UNIT UNIT UNIT UNIT ✔ USA-01 [#01] 6.25/12.5 ✔ IC-FR6000 EXP-01 [#03] 400–470 ✔ CHN-02 [#04] ✔ IC-FR6000-L CHN-01 [#06] 350–400 6.25/12.5/25.0 ✔ EXP-11 [#07]* 400–470 ✔ EXP-03 [#08] 350–400 ✔ EXP-13 [#09] ✔ USA-02 [#11] 450–512 6.25/12.5 IC-FR6000 ✔...
Page 3
The underlined parts have been updated from (Replacement page) August 2016 the previous version of the addendum. █ ADJUSTMENT CHANNEL LISTS Clone the adjust channels into the repeater before starting adjustment. Each channel must be assigned [Frequency], [RF PWR], [CH Type], [TX C. Tone] and [W/N] as shown below. •...
Page 4
The underlined parts have been updated from (Replacement page) August 2016 the previous version of the addendum. █ ADJUSTMENT CHANNEL LISTS (continued) • Channel list for [350 MHz] CONVENIENT: The same cloning file is available. Right-click below, and select "Save Embeded File to Disk."...
Page 5
The underlined parts have been updated from (Replacement page) August 2016 the previous version of the addendum. 6-5 FREQUENCY ADJUSTMENT 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 6
The underlined parts have been updated from (Replacement page) August 2016 the previous version of the addendum. 6-3 TRANSMIT ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 7
The underlined parts have been updated from (Replacement page) August 2016 the previous version of the addendum. 6-4 RECEIVE ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 8
(Amended page) August 2016 6-5 FREQUENCY ADJUSTMENT (For [#63], [#64], [#65], [#66], [#67], [#68], [#69], [#75], [#76], and [#77]) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 9
(Amended page) August 2016 6-6 TRANSMIT ADJUSTMENT (For [#63], [#64], [#65], [#66], [#67], [#68], [#69], [#75], [#76], and [#77]) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 10
(Amended page) August 2016 6-6 TRANSMIT ADJUSTMENT (continued) (For [#63], [#64], [#65], [#66], [#67], [#68], [#69], [#75], [#76], and [#77]) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 11
(Amended page) August 2016 6-7 RECEIVE ADJUSTMENT (For [#63], [#64], [#65], [#66], [#67], [#68], [#69], [#75], [#76], and [#77]) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 12
(Amended page) August 2016 6-7 RECEIVE ADJUSTMENT (continued) (For [#63], [#64], [#65], [#66], [#67], [#68], [#69], [#75], [#76], and [#77]) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 13
(Amended page) August 2016 SECTION 8 MECHANICAL PARTS [CHASSIS PARTS] [FRONT UNIT] PART PART DESCRIPTION QTY. DESCRIPTION QTY. 8920001170 CAB-1147 [#07] MP512 8930074161 3063 FRONT PLATE-1 [#14] 8920001170 CAB-1147 [#09] 8930074161 3063 FRONT PLATE-1 [#15] 8930074161 3063 FRONT PLATE-1 [#16] 8810003361 SET SCREWC M3 X 6 ZC3 8930074161 3063 FRONT PLATE-1 [#17]...
Page 45
(Amended page) August 2016 SECTION 1 VOLTAGE DIAGRAM • FRONT UNIT EMPG3338S 2SB1132 J504 Q508 R506 2.2K DS501 Q51 3 Q511 DTA114TU DTC114TU EMVR3338S R507 3.3K R558 POSW DS502 CP15S DTA114TU EMPG3338S R539 Q514 I C509 R508 2.2K R566 CP507 4.7K VCC1 GND1...
Page 46
(Amended page) August 2016 • MAIN-C/-D/-E UNIT (1/6) TX_ VCO1 ON: 3.6 V TX_ VCO1 ON: 3.2 V TX_ VCO2 ON: 3.5 V TX_ VCO2 ON: 3.0 V POWER SUPPLY R107 3.3VA TVCO8V 3.3VA 7.2 V 7.2 V 8.0 V 7.3 V R168 C191...
Page 47
(Amended page) August 2016 • MAIN-C/-D/-E UNIT (2/6) RX mode: 0.2 V TX mode: 7.2 V ANT SW C364 RX mode: 0 V R328 TX mode: 4.0 V 13.6 V C407 1.5P AS080340 AS080340 *C327 *L46 C389 AS100340 JDP2S12CR AS080340 C578 R327 2SC3357...
Page 48
(Amended page) August 2016 • MAIN-C/-D/-E UNIT (3/6) R102 7.0 V RXLV 8.0 V 0.9 V 0.7 V 2SC4116 RVCO8V RLVIN 2SK880 RX_ VCO1 ON: 3.5 V RX_ VCO1 ON: 3.8 V 1.2k 7.0 V RX_ VCO2 ON: 3.4 V RX_ VCO2 ON: 3.1 V RPLST PLSCK...
Page 49
(Amended page) August 2016 • MAIN-C/-D/-E UNIT (4/6) RX LO 5.8 V 6.1 V 1.9 V RX_VCO BUFF R185 C282 C313 0.7 V C275 R247 2SK1829 R380 2SC5108 2SC5108 7.9 V 0.4 V 1.8 V Analog mode: 4.4 V 7.8 V Digital mode: 0 V MP38 3063...
Page 52
Jul. 2012 SERVICE MANUAL ADDENDUM CONTENTS REPLACEMENT PAGES ....6-3, 6-4, 6-7 to 6-9, 8-1 to 8-3 PARTS LIST ......1 VOLTAGE DIAGRAM .
Page 53
(Replacement page) Jul. 2012 ¤ ADJUSTMENT CHANNEL LISTS Clone the adjust channels into the repeater before starting adjustment. Each channel must be assigned [Frequency], [RF PWR], [CH Type], [TX C. Tone] and [W/N] as shown below. • Channel list for [Low band] version •...
Page 54
(Replacement page) Jul. 2012 ¤ ADJUSTMENT CHANNEL LISTS (continued) • Channel list for [350 MHz] ([EXP-03] and [CHN-01]) CONVENIENT: The same cloning file is available. Right-click below, and select "Save Embeded File to Disk." For [Low band] version: For [High band] version: For [350 MHz band] version: 6 - 4...
Page 55
(Replacement page) Jul. 2012 6-3 TRANSMIT ADJUSTMENT 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 56
(Replacement page) Jul. 2012 6-3 TRANSMIT ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 57
(Replacement page) Jul. 2012 6-4 RECEIVE ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 58
DS504 5040002720 EMVR3338S MP11 8810003361 SET SCREWC M3 X 6 ZC3 [DPM-01] only DS511 5040002150 VRPG3349S-734 DS512 5040002150 VRPG3349S-734 [MAIN UNIT] (For all models except the IC-FR6000-L) S506 2250000511 RH70N1037E20-13F-2781 ORDER DESCRIPTION QTY. SP501 2510001221 C052SB500-14 <OSC> 6510026770 AXK540147YG W501 8900011801 OPC-1199A <KN>...
Page 61
Jul. 2012 SECTION 6. PARTS LIST [UNIT LIST] [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS MAIN MAIN-A MAIN-B DESCRIPTION MODEL VERSION LOCATION UNIT UNIT UNIT 1110007290 S.IC AK2330P-L 58.7/56.2 USA-01 – – 1130010100 S.IC LMX2352TMX/NOPB 120.2/43.9 1130010100 S.IC LMX2352TMX/NOPB 28.1/78.9...
Page 62
Jul. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION 1510000920 S.TRA 2SA1577 T106 Q 101.5/77.8 6050012380 S.XTA CR-826 DSA535SD 15.3 MHz 35.7/72.4 1590004350 S.TRA DRC9144E0L 102.3/73.7...
Page 63
Jul. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION 6200010290 S.COI C6328A-22NG-A [USA-01] B 34.8/140.3 7030005530 S.RES ERJ2GEJ 100 X (10) 70.7/90.4 6200010290 S.COI C6328A-22NG-A [EXP-01] 7030005110 S.RES ERJ2GEJ 224 X (220K)
Page 64
Jul. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION R207 7030005070 S.RES ERJ2GEJ 683 X (68K) 103.7/64.0 R320 7030005090 S.RES ERJ2GEJ 104 X (100K) 15.1/124.2 R208 7030010040 S.RES ERJ2GEJ-JPW...
Page 65
Jul. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION R486 7410001150 S.ARR EXB28V471JX 64.9/105.4 4030017620 S.CER C1005 CH 1H 100C-T 125.1/45.3 R487 7410001150 S.ARR EXB28V471JX 72.9/105.4...
Page 66
Jul. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C141 4550000270 S.TAN TEESVA 1E 474M8R 82.6/47.9 C180 4030017600 S.CER C1005 CH 1H 080C-T [USA-01] B 91.5/62.0...
Page 67
Jul. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C222 4030017530 S.CER C1005 CH 1H 0R5B-T 98.2/57.1 C282 4030017620 S.CER C1005 CH 1H 100C-T [USA-01] B 61.4/122.2...
Page 68
Jul. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C327 4030017360 S.CER C1005 CH 1H 030B-T [USA-01] B 141.9/89.3 C390 4030011070 S.CER GRM31M2C2H5R0CY21L 4030017360 S.CER C1005 CH 1H 030B-T...
Page 69
Jul. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C436 4030011050 S.CER GRM31M3C2H3R0CY21L C524 4030018910 S.CER C1608 JB 0J 475K-T 9.5/56.0 (GRM42-6 CJ) [USA-01] B 144.8/138.6 C525 4030018910 S.CER C1608 JB 0J 475K-T...
Page 89
FREQUENCY CHANNEL MODEL VERSION RANGE SPACING POWER USA-01 400–470 MHz 6.25/12.5/25.0 kHz USA-02 450–512 MHz EXP-01 400–470 MHz IC-FR6000 12.5/25.0 kHz EXP-02 450–520 MHz 50 W EXP-03 350–400 MHz DPM-03 400–470 MHz 6.25/12.5/25.0 kHz IC-FR6000-L CHN-01 350–400 MHz CHN-02 EUR-01 12.5/20.0/25.0 kHz...
Page 90
(Replacement page) May. 2012 6-3 TRANSMIT ADJUSTMENT 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 91
May. 2012 SECTION 6. PARTS LIST [UNIT LIST] [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS MAIN MAIN-A MAIN-B DESCRIPTION MODEL VERSION LOCATION UNIT UNIT UNIT 1110007290 S.IC AK2330P-L 58.7/56.2 USA-01 – – 1130010100 S.IC LMX2352TMX/NOPB 120.2/43.9 1130010100 S.IC LMX2352TMX/NOPB 28.1/78.9...
Page 92
May. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION 1590001400 S.TRA XP1214(TX) [USA-01] B 96.0/59.6 1590003291 S.TRA UNR9213G0L [USA-01] T 10.9/131.7 1590001400 S.TRA XP1214(TX) [EXP-01] 1590003291 S.TRA...
Page 93
May. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION 1790001251 S.DIO MA2S1110GL [USA-01] B 57.2/140.4 2020001460 CER CFWLA450KHFA-B0 1790001251 S.DIO MA2S1110GL [EXP-01] (CFWS450HT) 1790001251 S.DIO...
Page 94
May. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION 6200005691 S.COI ELJRE 18NGFA [USA-01] B 142.0/94.6 7030005530 S.RES ERJ2GEJ 100 X (10) 39.0/71.1 6200005691 S.COI...
Page 95
May. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION R197 7030005050 S.RES ERJ2GEJ 103 X (10K) 40.5/50.6 R308 7030008010 S.RES ERJ2GEJ 123 X (12K) [USA-01] T 140.8/128.3...
Page 96
May. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION R474 7030005530 S.RES ERJ2GEJ 100 X (10) 15.6/55.4 4030016930 S.CER C1005 JB 1A 104K-T 48.5/79.8 R475 7030005240 S.RES ERJ2GEJ 473 X (47K)
Page 97
May. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C124 4030016930 S.CER C1005 JB 1A 104K-T 48.5/50.5 C178 4030017580 S.CER C1005 CH 1H 060C-T [USA-01] B 32.0/112.2...
Page 98
May. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C213 4030017660 S.CER C1005 CH 1H 330J-T 68.5/106.1 C279 4030017580 S.CER C1005 CH 1H 060C-T [USA-01] B 59.6/120.9...
Page 99
May. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C326 4030017580 S.CER C1005 CH 1H 060C-T [USA-01] B 39.3/138.2 C381 4030017400 S.CER C1005 CH 1H 220J-T 111.4/95.3...
Page 100
May. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C436 4030011050 S.CER GRM31M3C2H3R0CY21L C524 4030018910 S.CER C1608 JB 0J 475K-T 9.5/56.0 (GRM42-6 CJ) [USA-01] B 144.8/138.6 C525 4030018910 S.CER C1608 JB 0J 475K-T...
Page 117
May. 2012 [PA UNIT] PARTS DESCRIPTION LOCATION (Optional) UR-PA6000 M.=Mounted side (T: Mounted on the Top side, B: Mounted on the Bottom side) Eqv.= This component is equivalent to the REF No. component listed above, and S.=Surface mount may be substituted on parts orders and repairs.
Page 124
FREQUENCY CHANNEL MODEL VERSION RANGE SPACING POWER USA-01 400–470 MHz 6.25/12.5/25.0 kHz USA-02 450–512 MHz EXP-01 400–470 MHz IC-FR6000 12.5/25.0 kHz EXP-02 450–520 MHz 50 W EXP-03 350–400 MHz DPM-03 400–470 MHz 6.25/12.5/25.0 kHz CHN-01 350–400 MHz IC-FR6000-L CHN-02 EUR-01 400–470 MHz...
Page 125
(Replacement page) Jan. 2012 ¤ ADJUSTMENT CHANNEL LISTS (continued) • Channel list for [350 MHz] ([EXP-03] and [CHN-01]) CONVENIENT: The same cloning file is available. Right-click below, and select "Save Embeded File to Disk." For [Low band] version: For [High band] version: For [350 MHz band] version: 6 - 4...
Page 126
(Replacement page) Jan. 2012 6-3 TRANSMIT ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 127
(Replacement page) Jan. 2012 6-4 RECEIVE ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 128
Jan. 2012 SECTION 6. PARTS LIST [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION 1110005330 S.IC NJM12904V-TE1-#ZZZB 58.1/71.4 1560000990 S.FET PMBFJ310 <RYO> 63.3/110.0 1110007290 S.IC AK2330P-L 58.7/56.2...
Page 129
Jan. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION 6200004660 S.COI MLF1608A 1R8K-T 115.6/39.2 7030010040 S.RES ERJ2GEJ-JPW 55.2/57.0 6200004660 S.COI MLF1608A 1R8K-T 23.6/82.5 7030004980 S.RES ERJ2GEJ 101 X (100) 34.1/56.5...
Page 130
Jan. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION R165 7030009320 S.RES ERJ2GEJ 4R7 X (4.7) 92.4/65.2 R285 7030005050 S.RES ERJ2GEJ 103 X (10K) 101.7/79.6 R166 7030009320 S.RES ERJ2GEJ 4R7 X (4.7)
Page 131
Jan. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION R471 7030005090 S.RES ERJ2GEJ 104 X (100K) 47.7/44.2 4030017500 S.CER C1005 CH 1H 560J-T 37.2/79.6 R472 7030005240 S.RES ERJ2GEJ 473 X (47K)
Page 132
Jan. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C157 4030017460 S.CER C1005 JB 1H 102K-T 28.0/117.2 C263 4030017420 S.CER C1005 CH 1H 470J-T 60.5/126.1 C158 4030017420 S.CER C1005 CH 1H 470J-T...
Page 133
Jan. 2012 [MAIN UNIT] (For all models except the IC-FR6000-L) [MAIN UNIT] (For all models except the IC-FR6000-L) PARTS PARTS DESCRIPTION DESCRIPTION LOCATION LOCATION C378 4030017420 S.CER C1005 CH 1H 470J-T 112.3/95.3 C492 4030016930 S.CER C1005 JB 1A 104K-T 13.5/32.6 C381 4030017400 S.CER C1005 CH 1H 220J-T...
Page 204
Aug. 2009 2SC4116 RVCO8V R102 POWER SUPPLY MAIN/MAIN-A UNIT (2/3) RXLV R105 3.3VA 3.3VA 2SK880 RLVIN ACZ1005Y 1.2K 3.3VA 1.8U PLL IC 0.47 SVA RPLST RX PLL 2SC4226 R121 R160 RPLST 0.68 MSVAC103 C113 *C168 C184 PLSSO 1.2U PLSSO 9P ECJ10 CH PLSCK PLSCK OUT1...
Page 205
Aug. 2009 POWER NJM12902V R342 R353 SUPPLY MAIN/MAIN-A UNIT (3/3) NJM12902V R535 IC34 R474 C513 100K C454 To D-SUB25 C586 3.3VA IC34 DATAIN C582 100P 470P 10 MSVA IC40 C581 R534 IC40 R536 C585 IC40 C588 NJM12904V C452 CONNECT UNIT VREF IC34 NJM12904V...
Page 206
Jun. 2009 SERVICE MANUAL ADDENDUM CONTENTS REPLACEMENT PAGES ..... . 6-5 and 6-6 PARTS LIST ....... . 1 BOARD LAYOUTS .
Page 207
(Replacement page) Jun. 2009 ¤ WHOLE PROCEDURE OF THE ADJUSTMENT q Connect the repeater and PC with the JIG cable (see the page 6-2). w Turn the repeater power ON. e Boot up 'CS-FR5000.' r Set the [Digital Function] to "Enable." t Click or [Read <–...
Page 225
Mar. 2009 SERVICE MANUAL ADDENDUM CONTENTS REPLACEMENT PAGES ..... . 6-7 PARTS LIST ....... . 1 VOLTAGE DIAGRAM .
Page 226
(Replacement page) Mar. 2009 6-2 FREQUENCY ADJUSTMENT 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 227
Mar. 2009 SECTION 7 PARTS LIST [MAIN/MAIN-A UNIT] [MAIN/MAIN-A UNIT] ORDER ORDER DESCRIPTION DESCRIPTION LOCATION LOCATION 1110005330 S.IC NJM12904V-TE1-#ZZZB 58.1/71.4 1590003230 S.TRA UNR9113J-(TX) [USA-01] 57.2/39.8 1110007290 S.IC AK2330P-L 58.7/56.1 1590003230 S.TRA UNR9113J-(TX) [EXP-01] 1130010100 S.IC LMX2352TMX/NOPB 120.2/43.9 1590003231 S.TRA UNR9113G0L [CHN-02] 1130010100 S.IC LMX2352TMX/NOPB...
Page 235
Mar. 2009 [MAIN/MAIN-A UNIT] [FRONT UNIT] ORDER ORDER DESCRIPTION DESCRIPTION LOCATION LOCATION 6510023110 CON 3008L-8P8C <KIN> IC500 1130009121 S.IC S1D15206F00A200 69.4/35.9 6450000140 CON HSJ0807-01-010 IC501 1110005771 S.IC S-80942CNMC-G9CT2G 105.3/24 6510023092 S.CON 20FLT-SM2-TB(LF)(SN)(M) 59.1/15.6 IC502 1140014580 S.IC UPD78F1153GK-GAK-AX 6510019371 S.CON B3B-ZR-SM4-TF(LF)(SN) 94.6/14.3 (FX3063C-1) 101.3/38.7...
Page 236
Mar. 2009 [FRONT UNIT] [FRONT UNIT] ORDER ORDER DESCRIPTION DESCRIPTION LOCATION LOCATION R517 7030008010 S.RES ERJ2GEJ 123 X (12K) 110.3/33 C563 4030016930 S.CER ECJ0EB1A104K 105.1/28 R518 7410001140 S.ARR EXB28V104JX 106.9/47.1 C564 4030016930 S.CER ECJ0EB1A104K 103.2/28 R519 7030005090 S.RES ERJ2GEJ 104 X (100K) 105.4/48.4 C565 4030016930 S.CER ECJ0EB1A104K...
Page 237
Mar. 2009 SECTION 11 VOLTAGE DIAGRAM POWER SUPPLY 3.3VA 3.3VA MAIN/MAIN-A UNIT (1/3) *C364 R328 DSP5V TX REFERENCE OSCILLATOR(15.3 MHz) DSP5V C407 REF5 REF5 AS080340 1.5P AS080340 AS080340 *C324 *C327 *D44 C389 PLL IC AS100340 0.001 AS080340 TPLST TPLST C578 PLSSO PLSSO 0.001...
Page 238
Mar. 2009 2SC4116 RVCO8V R102 MAIN/MAIN-A UNIT (2/3) POWER SUPPLY RXLV R105 3.3VA 3.3VA 2SK880 RLVIN ACZ1005Y 1.2K 3.3VA PLL IC 1.8U 0.47 SVA RX PLL RPLST 2SC4226 RPLST 0.68 MSVAC103 C113 R121 R160 *C168 C184 PLSSO 1.2U PLSSO 9P ECJ10 CH PLSCK PLSCK OUT1...
Page 239
Mar. 2009 POWER NJM12902V R342 R353 SUPPLY NJM12902V MAIN/MAIN-A UNIT (3/3) R535 IC34 R474 C513 100K C454 To D-SUB25 C586 3.3VA IC34 DATAIN C582 100P 470P 10 MSVA IC40 C581 R534 IC40 R536 C585 IC40 C588 NJM12904V C452 CONNECT UNIT VREF IC34 NJM12904V...
Page 240
VOLTAGE DIAGRAM ......11 FREQUENCY MODEL VERSION CH. SPACING RANGE POWER USA-01 400–470 MHz 6.25/12.5/25.0 USA-02 450–520 MHz IC-FR6000 EXP-01 400–470 MHz 12.5/25.0 kHz 50 W EXP-02 450–520 MHz CHN-02 400–470 MHz 6.25/12.5/25.0 IC-FR6000-L CHN-01 350–400 MHz...
Page 241
(Replacement page) Feb. 2009 SECTION 6 ADJUSTMENT PROCEDURE 6-1 PREPARATION ¤ REQUIRED EQUIPMENTS EQUIPMENT EQUIPMENT SPECIFICATION SPECIFICATION Adjustment Modifi ed OPC-1122U (USB type) "CS-FR5000" (Revision 1.0 or later) JIG cable Software (see the illust below) Output voltage : 13.6 V DC [FR6000/L] Power attenuation : 40 dB 13.2 V DC [FR6100] Capacity...
Page 242
(Replacement page) Feb. 2009 ¤ CONNECTION <Front view> to the [MICROPHONE CONNECTOR] JIG CABLE <Rear view> OSCILLOSCOPE MODULATION ANALYZER (DC to 10 kHz) (0.1–600 MHz) ATTENUATOR STANDARD SIGNAL GENERATOR (30 dB/60 W) 20 A (0.1–600 MHz) fuses (Detect output) FREQUENCY COUNTER (0.1–600 MHz) RF POWER METER (Loose Coupling)
Page 243
(Replacement page) Feb. 2009 ¤ ADJUSTMENT CHANNEL LISTS Clone the adjust channels into the repeater before starting adjustment. Each channel must be assigned [Frequency], [RF PWR], [CH Type], [TX C. Tone] and [W/N] as below. • Channel list for [Low band] version •...
Page 244
(Replacement page) Dec. 2008 ¤ ADJUSTMENT CHANNEL LISTS (continued) • Channel list for [IC-FR6000-L] 6 - 4...
Page 245
(Replacement page) Feb. 2009 ¤ WHOLE PROCEDURE OF THE ADJUSTMENT q Connect the repeater and PC with the JIG cable (see the page 6-2). w Turn the repeater power ON. e Boot up 'CS-FR5000.' r Set the [Digital Function] to "Enable." r Click or [Read <–...
Page 247
(Replacement page) Feb. 2009 6-2 FREQUENCY ADJUSTMENT 1) Select an adjustment item using cursor or [] / [] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [] / [] keys of the PC’s keyboard, and then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 248
6-3 TRANSMIT ADJUSTMENT 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 249
6-3 TRANSMIT ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 250
(Replacement page) Feb. 2009 6-4 RECEIVE ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
Page 261
Feb. 2009 SECTION 11 VOLTAGE DIAGRAM FRONT UNIT B2B-ZR-SM4-TF 2SB1132 EMPG3338S J504 Q508 R506 2.2K DS501 Q513 Q511 D TA114TU DTC114TU EMVR3338S R507 3.3K R558 POSW CP15S DS502 DTA114TU EMPG3338S R539 Q514 I C509 R508 2.2K R566 CP507 4.7K VCC1 GND1 Q517 R542...
Page 262
Feb. 2009 SECTION 11 VOLTAGE DIAGRAM POWER SUPPLY 3.3VA 3.3VA MAIN UNIT (1/3) *C364 R328 DSP5V TX REFERENCE OSCILLATOR(15.3 MHz) DSP5V C407 REF5 REF5 AS080340 1.5P AS080340 AS080340 *C324 *C327 *D44 C389 PLL IC AS100340 0.001 AS080340 TPLST TPLST C578 PLSSO PLSSO 0.001...
Page 263
Feb. 2009 2SC4116 RVCO8V R102 MAIN UNIT (2/3) POWER SUPPLY RXLV R105 3.3VA 3.3VA 2SK880 RLVIN ACZ1005Y 1.2K 3.3VA PLL IC 1.8U RX PLL 0.47 SVA RPLST 2SC4226 RPLST 0.68 MSVAC103 C113 R121 R160 *C168 *C184 PLSSO 1.2U PLSSO PLSCK PLSCK OUT1 CUTO...
Page 264
Feb. 2009 NJM12902V R342 R353 ER SUPPLY NJM12902V MAIN UNIT (3/3) R535 IC34 R474 C513 100K C454 To D-SUB25 C586 3.3VA IC34 DATAIN C582 100P 470P 10 MSVA IC40 C581 R534 IC40 R536 C585 IC40 C588 NJM12904V C452 CONNECT UNIT VREF IC34 NJM12904V...
Page 265
Dec. 2008 SERVICE MANUAL ADDENDUM CONTENTS REPLACEMENT PAGES ..... . 6-3, 5, 8, 9 PARTS LIST ....... . 1 VOLTAGE DIAGRAM .
Page 266
(Replacement page) Dec. 2008 ¤ ADJUSTMENT CHANNEL LISTS Clone the adjust channels into the repeater before starting adjustment. Each channel must be assigned [Frequency], [RF PWR], [CH Type], [TX C. Tone] and [W/N] as below. • Channel list for [Low band] version •...
Page 268
6-3 TRANSMIT ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT CONDITION...
Page 269
(Replacement page) Dec. 2008 6-4 RECEIVE ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT CONDITION...
Page 282
Dec. 2008 2SC4116 RVCO8V R102 MAIN UNIT (2/3) POWER SUPPLY RXLV R105 3.3VA 3.3VA 2SK880 RLVIN ACZ1005Y 1.2K 3.3VA PLL IC 1.8U RX PLL 0.47 SVA RPLST 2SC4226 RPLST 0.68 MSVAC103 C113 R121 R160 *C168 *C184 PLSSO 1.2U PLSSO PLSCK PLSCK OUT1 CUTO...
Page 283
Dec. 2008 NJM12902V R342 R353 ER SUPPLY NJM12902V MAIN UNIT (3/3) R535 IC34 R474 C513 100K C454 To D-SUB25 C586 3.3VA IC34 DATAIN C582 100P 470P 10 MSVA IC40 C581 R534 IC40 R536 C585 IC40 C588 NJM12904V C452 CONNECT UNIT VREF IC34 NJM12904V...
Page 284
Dec. 2008 SERVICE MANUAL ADDENDUM CONTENTS REPLACEMENT PAGE ..... . . 6-6 PARTS LIST ....... . 1 VOLTAGE DIAGRAM .
Page 285
(Replacement page) Dec. 2008 6-2 FREQUENCY ADJUSTMENT 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT CONDITION...
Page 286
Dec. 2008 SECTION 7 PARTS LIST [FRONT UNIT] [FRONT UNIT] ORDER ORDER DESCRIPTION DESCRIPTION LOCATION LOCATION IC500 1130009121 S.IC S1D15206F00A200 69.4/35.9 R571 7030005070 S.RES ERJ2GEJ 683 X (68 k) 45.8/51.5 IC501 1110005771 S.IC S-80942CNMC-G9CT2G 105.3/24 R572 7030005090 S.RES ERJ2GEJ 104 X (100 k) 46.2/50.3 IC502 1140014250 S.IC...
Page 296
Dec. 2008 2SC4116 RVCO8V R102 MAIN UNIT (2/3) POWER SUPPLY RXLV R105 3.3VA 3.3VA 2SK880 RLVIN ACZ1005Y 1.2K 3.3VA PLL IC 1.8U RX PLL 0.47 SVA RPLST 2SC4226 RPLST 0.68 MSVAC103 C113 R121 R160 *C168 *C184 PLSSO 1.2U PLSSO PLSCK PLSCK OUT1 CUTO...
Page 297
Dec. 2008 NJM12902V R342 R353 ER SUPPLY NJM12902V MAIN UNIT (3/3) R535 IC34 R474 C513 100K C454 To D-SUB25 C586 3.3VA IC34 DATAIN C582 100P 470P 10 MSVA IC40 C581 R534 IC40 R536 C585 IC40 C588 NJM12904V C452 CONNECT UNIT VREF IC34 NJM12904V...
Page 298
UHF FM REPEATER S-14419XZ-C1 Feb. 2008...
Page 299
8. READ the instructions of test equipment throughly before connecting a test equipment to the repeater. Icom, Icom Inc. and logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
SECTION 2 INSIDE VIEWS 1st mixer (DBM) (D62, L27, 32) Discriminator IF IC • MAIN UNIT (IC5) (X3) (TOP VIEW) RX VCOs PLL IC (RX loop) TX power AMP (IC4) (IC22) 2nd IF filter (Wide) (FI1) 2nd IF filter (Narrow) (FI2) FUNCTION Ref.
Page 304
• FRONT UNIT AF POWER AMP. (IC509) SPEAKER SW (Q508) ANALOG SW (IC506) LCD DRIVER (IC500) FRONT CPU (IC503) CLOCK OSC (X501) 2 - 2...
SECTION 3 DISASSEMBLY INSTRUCTION 1. Removing the front panel q Unscrew 11 screws from the top cover. w Unscrew 7 screws from the front panel. e Disconnect the cable from the MAIN UNIT assembly, and remove the front panel. 2. Removing the MAIN UNIT assembly q Uscrew 5 screws which settles the MAIN UNIT assembly.
Page 306
w Unsolder 2 points at the ANT cases. e Unscrew 4 screws from the ANT cases, Unsolder and remove them. ANT case r Disconnect the flat cabe from J4 and the speaker cable from J9. Unscrew ANT case Flat cable Disconnect t Unsolder 2 points at the bottom of ANT connectors.
SECTION 4 OPTIONAL UNIT INSTALLATION Install UT-109R or UT-110R as follows. q Disassembly the repeater until the MAIN UNIT is exposed. (See the page 3-1) w Modify the patterns on the MAIN UNIT as below. <MAIN UNIT (bottom side)> A and F; Cut the pattern B;...
SECTION 5 CIRCUIT DESCRIPTION 5-1 TRANSMITTER CIRCUITS 5-2 RECEIVER CIRCUITS TX PLL CIRCUIT RX PLL CIRCUIT TX PLL IC (IC3) outputs resulting signal of phase- The RX PLL IC (IC4) outputs resulting signal of phase- comparison of REF signal (15.3 MHz) and feedback OSC comparison of REF signal from the TCXO (X2: 15.3 MHz) signal from TX VCO.
IF FILTER/IF AMP CIRCUITS 5-3 OTHER CIRCUITS The 1st IF signal from the 1st mixer (L27, 32, D62) is POWER SUPPLY amplified by the post AMP (Q63, 64) and 1st stage of IF The power supply is switched by Q57 (ON/OFF). 5V (REF5) AMP (Q7) then fi...
5-4 CPU (M: IC20) PORT ALLOCATION LINE NAME DESCRIPTION CONDITION 140–144 D0–D4 DSP data bus line. – 1–11 D5–D15 DSP data bus line. – 15–28 A1–A14 DSP data bus line. – DSP data line. – FANS Cooling fan (CH: MF1) rotation detect. "H"=While the cooling fan is rotating.
Page 311
3-4 CPU (M: IC20) PORT ALLOCATION (continued) LINE NAME DESCRIPTION CONDITION DAST Strobe to the DAC (M: IC2). – FMDA Data from the FRONT CPU (F: IC502). – MFDA Data to the FRONT CPU (F: IC502). – OPT2 Port for optional unit. –...
SECTION 6 ADJUSTMENT PROCEDURE 6-1 PREPARATION ¤ REQUIRED EQUIPMENTS EQUIPMENT SPECIFICATION EQUIPMENT SPECIFICATION Adjustment Modifi ed OPC-1122U (USB type) "CS-FR5000" (Revision 1.0 or later) JIG cable Software (see the illust below) Output voltage : 13.6 V DC [FR6000] Power attenuation : 40 dB 13.2 V DC [FR6100] Capacity : More than 60 W...
Page 313
¤ CONNECTION <Front view> to the [MICROPHONE CONNECTOR] JIG CABLE <Rear view> OSCILLOSCOPE MODULATION ANALYZER (DC to 10 kHz) (0.1–600 MHz) ATTENUATOR (30 dB/60 W) STANDARD SIGNAL GENERATOR 20 A (0.1–600 MHz) fuses (Detect output) FREQUENCY COUNTER (0.1–600 MHz) RF POWER METER (Loose Coupling) DC power supply Black...
Page 314
¤ ADJUSTMENT CHANNEL LISTS Clone the adjust channels into the repeater before starting adjustment. Each channel must be assigned [Frequency], [RF PWR], [CH Type], [TX C. Tone] and [W/N] as below. • Channel list for [Low band] version • Channel list for [High band] version 6 - 3...
Page 315
¤ WHOLE PROCEDURE OF THE ADJUSTMENT q Connect the repeater and PC with the JIG cable (see the page 6-2). w Turn the repeater power ON. e Boot up 'CS-FR5000.' r Set the [Digital Function] to "Enable." r Click or [Read <– TR] in the [Adjust] menu, then the "Adjust Utility" window (see the page 6-5) appears. t Set or modify adjustment values as specifi...
6-2 FREQUENCY ADJUSTMENT 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT CONDITION...
6-3 TRANSMIT ADJUSTMENT 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT...
6-3 TRANSMIT ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT CONDITION...
Page 320
6-4 RECEIVE ADJUSTMENT (continued) 1) Select an adjustment item using cursor or [↑] / [↓] keys of the PC’s keyboard. 2) Set or modify the adjustment value as specifi ed using [←] / [→] keys of the PC’s keyboard, then push the [ENTER] key. ADJUSTMENT ADJUSTMENT ADJUSTMENT CONDITION...
Need help?
Do you have a question about the IC-FR6000 and is the answer not in the manual?
Questions and answers