Icom IC-FR5000 Series Sales Handbook page 26

Port Setting : Port Setting : Port Setting : Port Setting :
Assign a function to each port;
For [Ext.I For [ Ext.I/O 15 to 25] /O 15 to 25]
For [ For [ Ext.I Ext.I /O 15 to 25] /O 15 to 25]
• In/Out In/Out
In/Out In/Out
Select the type of the assignable function from Input
and Output.
• Active Logic Active Logic Active Logic (Available when "Output" is selected Active Logic
In/Out as above) In/Out
In/Out In/Out
Select the active logic for the D-sub 25 pin output
from High and Low.
Function- - - - When "Input" is selected in In/Out Function When "Input" is selected in In/Out
Function Function When "Input" is selected in In/Out When "Input" is selected in In/Out
• Null Null
Null Null
No function.
• MCH Select : 1/2/3/4/5 MCH Select : 1/2/3/4/5 MCH Select : 1/2/3/4/5 MCH Select : 1/2/3/4/5
You can select the desired memory channel with the
function. Activate the desired MCH Selects assigned
ports to make the Ext CH No. You can make the Ext
CH No. one of the 32 pre-programmed memory
channels. (see table below) [0]: Hi-Z, [1]: 0 V
MCH Select : 1 MCH Select : 1
MCH Select : 1 MCH Select : 1
MCH Select : 2 MCH Select : 2 MCH Select : 2 MCH Select : 2
MCH Select : 3 MCH Select : 3
MCH Select : 3 MCH Select : 3
MCH Select : 4 MCH Select : 4 MCH Select : 4 MCH Select : 4
MCH Select : 5 MCH Select : 5
MCH Select : 5 MCH Select : 5
MCH Select MCH Select MCH Select MCH Select MCH Select MCH Select MCH Select MCH Select
CH CH CH CH
CH CH CH CH
5 5 5 5 4 4 4 4 3 3 3 3 2 2 2 2
1 0 0 0 0
2 0 0 0 0
3 0 0 0 1
4 0 0 0 1
5 0 0 1 0
6 0 0 1 0
7 0 0 1 1
8 0 0 1 1
9 0 1 0 0
10 0 1 0 0
11 0 1 0 1
12 0 1 0 1
13 0 1 1 0
14 0 1 1 0
15 0 1 1 1
16 0 1 1 1
• EPTT EPTT EPTT EPTT
When the port is activated, the Ext. PTT (EPTT)
function is turned "ON".
• Repeat Disable Repeat Disable Repeat Disable Repeat Disable
When the port is activated, the repeater operation is
disabled.
•TX Disable TX Disable TX Disable TX Disable
When the port is activated, the transmission is
disabled.
•Mic Mute Mic Mute
Mic Mute Mic Mute
When the port is activated, the connected
microphone is muted.
•Ext. Key Ext. Key Ext. Key Ext. Key
You can use the port as the customized key. The
same functions in the Key Assign are assignable to
the port.
Connector Description
+ 1 CH
+ 2 CH
+ 4 CH
+ 8 CH
+ 16 CH
MCH Select MCH Select MCH Select MCH Select MCH Select MCH Select MCH Select MCH Select
CH CH CH CH
CH CH CH CH
1 1 1 1 5 5 5 5 4 4 4 4 3 3 3 3 2 2 2 2
0 17 1 0 0 0
1 18 1 0 0 0
0 19 1 0 0 1
1 20 1 0 0 1
0 21 1 0 1 0
1 22 1 0 1 0
0 23 1 0 1 1
1 24 1 0 1 1
0 25 1 1 0 0
1 26 1 1 0 0
0 27 1 1 0 1
1 28 1 1 0 1
0 29 1 1 1 0
1 30 1 1 1 0
0 31 1 1 1 1
1 32 1 1 1 1
Function Function- - - - When "Output" is selected in In/Out Function Function When "Output" is selected in In/Out When "Output" is selected in In/Out When "Output" is selected in In/Out
• Null Null Null Null
No function.
• Busy Busy
Busy Busy
Acts when receiving a carrier signal that is stronger
than the SQL level.
• Analog Audible Analog Audible Analog Audible Analog Audible
Acts when the mute is released by receiving an
analog signal.
• Digital Audible Digital Audible
Digital Audible Digital Audible
Acts when the mute is released by receiving a digital
signal.
• Mic Mute Mic Mute Mic Mute Mic Mute
Acts while the connected microphone's mute is
released.
• Hanger Hanger
Hanger Hanger
Acts while the connected microphone is put down on
its hanger (hanger-on).
• PTT PTT PTT PTT
Acts while pushing the connected microphone's [PTT]
or Ext.PTT (EPTT).
• TX TX TX TX
Acts while the repeater is transmitting.
• Low Voltage 1/2 Low Voltage 1/2 Low Voltage 1/2 Low Voltage 1/2
Acts when the repeater's voltage is lower than the Acts when the repeater's voltage is lower than the
1 1 1 1
Low Voltage 1/2 Low Voltage 1/2 Low Voltage 1/2 Low Voltage 1/2 in the Common screen respectively.
0
• Over Voltage Over Voltage
Over Voltage Over Voltage
1
Acts when the repeater's voltage is overvoltage.
0
• Final Protect Final Protect Final Protect Final Protect
1
0
Acts when the final protect is activated.
1
• Fan State Fan State Fan State Fan State
0
Acts while the FAN works improperly.
1
• RX/TX Unlock RX/TX Unlock
RX/TX Unlock RX/TX Unlock
0
1
Acts while the RX/TX PLL is unlocked.
0
• P0/1/2/3/4 Monitor P0/1/2/3/4 Monitor P0/1/2/3/4 Monitor P0/1/2/3/4 Monitor
1
Outputs the customized key (P0 to 4) condition when
0
each key is pushed.
1
0
For [Ext. D/A 10] For [Ext. D/A 10] For [Ext. D/A 10] For [Ext. D/A 10]
1
The Analog Output port can output the Analog signal to
the D/A port.
• Null Null
Null Null
No function.
• Power Power Power- - - - supply Voltage Power supply Voltage supply Voltage supply Voltage
Outputs the VIN (proportionate to the power-supply
voltage).
• Temperature Temperature Temperature Temperature
Outputs the TEMPS (proportionate to the
temperature).
• RSSI RSSI RSSI RSSI
Outputs the SD (proportionate to the received
signal's RSSI voltage).
26