Operation; Receiving And Transmitting - Icom CY 6000 Instruction Manual

4

OPERATION

■ Turning power ON
➀ On rear panel, toggle AC Power Switch up to
turn AC power ON.

■ Receiving and transmitting

 Receiving
➀ Connect optional Field service Aid
Microphone/Speaker.
•When receiving a signal, RX indicator turns ON
and audio is emitted from the speaker.
 Transmitting for Local Control
➀ Take the microphone off hook.
➁ Wait for the channel to become clear.
➂ Push and hold [PTT] to transmit, then
speak into the microphone at your normal
voice level.
➃ Release [PTT] to receive.
IMPORTANT:
To maximize the readability of the transmitted
signal:
(1) Pause briefly after pushing [PTT].
(2) Hold the microphone 1 to 2 inch (2.5 to
5 cm) from your mouth, then speak into
the microphone at a normal voice level.
8