Table of Contents
Advertisement
Getting started
Getting started
Getting started
Getting started
o This cloning software is designed to perform data
setting and cloning for the IC-FR5000/IC-FR6000
series VHF/UHF FM REPEATERS.
o HELP WINDOW: CS-FR5000 has a help window to
describe functions and operation.
System requirements
System requirements
System requirements
System requirements
To use this program, the following hardware and
software are required:
PC
PC
PC
PC
• Microsoft
®
Windows
®
2000/XP or Microsoft
Vista™ is installed
• With USB port
Other item
Other item
Other item
Other item
Optional OPC-1122U
*
CLONING CABLE (USB type)
▒ NOTE:
NOTE:
NOTE:
NOTE:
▒ To use the OPC-1122U, USB type cloning cable, USB
▒ driver installation is necessary. The driver is supplied
▒ with the OPC-1122U. See the OPC-1122U instruction
▒ manual for the installation details.
*The USB driver, supplied with the OPC-1122U, is not
®
supported for Microsoft
Software installation
Software installation
Software installation
Software installation
1 Quit all applications when Windows is running.
2 Insert the CD into the appropriate CD drive.
3 Double-click the "Setup.exe" contained in the CD.
4 The "Welcome to the InstallShield Wizard for CS-
FR5000" will appear as below. Click [Next>].
5 The "User Information" will appear as below, then
type your name, your company name and the
product ID number with the following manner. Then
click [Next >].
• ID number: 306401-(6 digit serial number)
• e.g. the serial number on the CD is 000001, enter
"306401-000001" as the ID number.
Note 1: Icom distributes cloning software by CD or license. Depending on this, some information here may not apply as
written, e.g. ID number.
4-2
Cloning Software CS-FR5000
4-2-1
Basic Setup of Cloning Software
®
Windows
Windows Vista™(64 bit).
6 The "Choose Destination Location" will appear as
below. Then click [Next>] to install the software to
the destination folder. (e.g. C:\Program
Files\Icom\CS-FR5000)
• Click [Browse...] to select another destination
folder before clicking [Next >], if desired.
7 After the installation is completed, the "InstallShield
Wizard Complete" will appear as below. Then click
[Finish].
8 Eject the CD.
9 Program group 'CS-FR5000' appears in the
'Programs' folder of the start menu, and 'CS-
FR5000' short cut icon appears on the desktop
screen.
• To uninstall the cloning software, select the
"Control Panel" in the start menu, and click the
"Add or Remove Programs."
Then, select the program group 'Icom CS-FR5000'
and click [Remove].
27
Hide quick links:
Advertisement
Table of Contents
