Icom IC-FR5000 Series Sales Handbook page 34

.
Scan List Scan List Scan List Scan List
A total of 16 scanning lists are available for a wide
variety and flexible scanning operation. In this screen,
program scanning condition for each list.
Display Text Display Text Display Text Display Text
Enter up to a 12-character text to indicate message,
etc. and/or indicating the scan list during scanning.
Scan Type Scan Type Scan Type Scan Type
Set the scanning type to each scan list. Scan OFF,
Normal Scan and Priority Scan are available.
The watch time period, the power ON scan function
etc. is programmed in Scan Setting screen.
Scan OFF: Scan OFF:
Scan OFF: Scan OFF:
Scanning operation is turned OFF.
Normal Scan: Normal Scan:
Normal Scan: Normal Scan:
Normal scan. Scans all selected channels. The scan
proceeds in sequence.
Priority Scan: Priority Scan: Priority Scan: Priority Scan:
Priority scan. "Primary CH" and "Secondary CH" are
used as the priority channel.
The selected channels are scanned in sequence while
monitoring "Primary CH" and "Secondary CH."
When scan is paused on "Primary CH," other channels
are not monitored.
When "Secondary CH" is not set: When "Secondary CH" is not set: When "Secondary CH" is not set: When "Secondary CH" is not set:
When a signal is detected on a channel other than
"Primary CH," scan pauses until the signal disappears
and "Primary CH" is continuously monitored.
Scan moves and pauses on "Primary CH," if the signal
is detected on.
4-6 Scan
When "Secondary CH" is set: When "Secondary CH" is set: When "Secondary CH" is set: When "Secondary CH" is set:
− When a signal is detected on a channel other than
"Primary CH" or "Secondary CH," scan pauses until the
signal disappears and "Primary CH" and "Secondary
CH" are continuously monitored alternately.
Scan moves and pauses on "Primary CH" or "Secondary
CH" if the signal is detected on it.
− When a signal is detected on "Secondary CH," scan
pauses until the signal disappears and "Primary CH" is
continuously monitored.
Scan moves and pauses on "Primary CH" if the signal is
detected on it.
* "Prio A" means "Primary CH," and "Prio B" means * "Prio A" means "Primary CH," and "Prio B" means
"Secondary CH."
▒ NOTE: NOTE: NOTE: NOTE: The scanning channels are selected in Scan
▒ List List in in the Memory CH screen.
List List
The compatibility of the previous and current scan mode The compatibility of the previous and current scan mode
The compatibility of the previous and current scan mode The compatibility of the previous and current scan mode
Primary CH (Available when "Priority Scan" is selected Primary CH
Primary CH Primary CH
in Scan Type Scan Type.) Scan Type Scan Type
Select the desired channel as a primary channel. The
selected channel is monitored during priority scan.
Prio Prio- - - - A CH A CH The priority A channel is used as the
Prio Prio A CH A CH
primary channel.
Prio Prio Prio- - - - B CH Prio B CH B CH B CH The priority B channel is used as the
primary channel.
Start CH Start CH Scan start channel is used as the
Start CH Start CH
primary channel.
CH Number CH Number CH Number CH Number The selected channel is used as the
Select Select Select Select primary channel.
Scan Scan Scan
34