Icom IC-FR5000 Instruction Manual
  1. Manuals
  2. Brands
  3. Icom Manuals
  4. Repeater
  5. iC-FR5000
  6. Instruction manual

Icom IC-FR5000 Instruction Manual

Vhf dpmr and uhf dpmr repeaters
Hide thumbs Also See for IC-FR5000:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Insrtuction Manual
INSTRUCTION MANUAL
VHF dPMR REPEATER
iFR5000
UHF dPMR REPEATER
iFR6000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IC-FR5000 and is the answer not in the manual?

Questions and answers

Related Manuals for Icom IC-FR5000

Summary of Contents for Icom IC-FR5000

  • Page 1 INSTRUCTION MANUAL VHF dPMR REPEATER iFR5000 UHF dPMR REPEATER iFR6000...

  • Page 2: Forward

    FR5000/IC-FR6000 is de- before attempting to operate the re- vhf/uhf dpmr repeaters signed and built with Icom’s state of the art technol- peater. ogy and craftsmanship. With proper care, this product SAVE THIS INSTRUCTION MANUAL– should provide you with years of trouble-free opera- This tion.

  • Page 3: Table Of Contents

    SUPPLIED ACCESSORIES PRECAUTIONS R WARNING HIGH VOLTAGE! NEVER attach an The following accessories are supplied. antenna or internal antenna connector during trans- mission. This may result in an electrical shock or burn. Handles For handles attachment Spacers R WARNING HIGH VOLTAGE! NEVER install the antenna at any place that person touch the an- tenna easily during transmission.

  • Page 4: Panel Description

    PANEL DESCRIPTION ■ Front panel Function display q INTERNAL SPEAKER u MICROPHONE CONNECTOR [MIC] You can listen to received audio. This 8-pin modular jack accepts the optional micro- phone. w VOLUME CONTROL [VOLUME] (p. 7) KEEP the [MIC] connector cover over the con- Rotate to adjust the audio output level.

  • Page 5: D Function Display

    PANEL DESCRIPTION D Function display I C O M I n c . q SIGNAL STRENGTH ICON r COMPANDER ICON Indicates the relative signal strength level. Appears when the compander function is activated. w LOW POWER ICON t SCRAMBLER ICON Appears when low output power is selected.

  • Page 6: D Accessory Connector

    PANEL DESCRIPTION D Accessory connector Pin No. Pin Name Description Specification No connection — Output terminal for serial communication data. — Input terminal for serial communication data. — Output terminal for request-to-send data. — Input terminal for clear-to-send data. — No connection —...

  • Page 7: Installation And Connections

    INSTALLATION AND CONNECTIONS ■ Unpacking ■ Antenna connection After unpacking, immediately report any damage to For radio communications, the antenna is a critical the delivering carrier or dealer. Keep the shipping car- component, along with output power and sensitivity. tons. Select antenna(s), such as a well-matched 50 ˘...

  • Page 8: Front Panel Connection

    Input port for PC programming CAUTION: DO NOT short pin 1 to ground as this can damage the internal 8 V regulator. DC voltage is applied to pin 1 for microphone operation. Only Icom micro- phones are recommended. ■ Rear panel connection SP-22 EXTERNAL SPEAKER ACC CONNECTOR (p.

  • Page 9: Power Supply Connection

    INSTALLATION AND CONNECTIONS ■ Power supply connection ■ Mounting the repeater D Using the supplied handles Make sure the repeater’s power switch is turned OFF when connecting a DC power cable. The handles are convenient for mounting the repeater into a 19 inch rack. The handles can be installed on R WARNING! Voltages greater than 16 V DC will the repeater’s front panel.

  • Page 10: Operation

    OPERATION ■ Receiving and transmitting D Base station operation D Repeater operation Receiving Ask your dealer for details of the repeater’s program- q Push [POWER] to turn ON the power. ming. w Set the squelch and audio levels. ➥ First, rotate [SELECT]* fully counterclockwise.

  • Page 11: Maintenance

    If you are unable to locate the cause of a problem or The following chart is designed to help correct prob- solve it through the use of this chart, contact the near- lems which are not equipment malfunctions. est Icom Dealer or Service Center. PROBLEM POSSIBLE CAUSE SOLUTION REF.

  • Page 12: Options

    Icom repeater. Icom is not responsible for the destruction or damage to an Icom repeater in the event the Icom repeater is used with equipment that is not manufactured or ap- proved by Icom.
  • Page 13 MEMO...
  • Page 14 MEMO...
  • Page 15 MEMO...
  • Page 16 A-6980H-1EX-0a Printed in Japan © 2011–2014 Icom Inc. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan Printed on recycle paper with soy ink.

This manual is also suitable for:

Ic-fr6000

Table of Contents