Display Assign - Icom IC-FR5000 Series Sales Handbook

Display Display
Display Display
• Opening Text Opening Text Opening Text Opening Text
Enter up to a 12-character repeater opening message
to appear on the LCD for 2 sec. when turning the
repeater ON.
Set this item as blank for no indication when turning
the repeater ON.
• Opening Beep Opening Beep (Available only when Opening Text Opening Beep Opening Beep
programmed as above)
Set the opening beep function to emit a beep when
the opening text is displayed on the LCD.
OFF OFF Beep emission (or non emission) is
OFF OFF
retained even when the opening text is
displayed on the LCD.
Short Short 1 high beep "Pi" is emitted once.
Short Short
Long Long A long beep sound is emitted during the
Long Long
time the opening text is displayed on the
LCD.
• Label Label Label Label
Enter the desired up to a 12-character Label. Enter the desired up to a 12-character Label.
When "Label" or "MR CH + Label" is selected in Display When "Label" or "MR CH + Label" is selected in Display
Mode, the programmed label will be indicated on the Mode Mode Mode
LCD.
• Display Mode Display Mode
Display Mode Display Mode
Select the display indication from MR CH, Label, or MR
CH + Label.
MR CH MR CH The display indicates the selected
MR CH MR CH
memory channel's programmed
text. When no text is programmed,
indicates the memory channel
number.
Label Label Label Label The display indicates the
programmed label in Label
above. When no label is
programmed, indicates the
selected operating channel number
or programmed text.
MR CH + Label MR CH + Label The display indicates the
MR CH + Label MR CH + Label
programmed label in Label
above and the programmed text.
When no label is programmed,
indicates the selected operating
channel number or programmed
text.
4-1-2

Display Assign

Opening Text is Opening Text Opening Text
Display Display
Display Display Display Display
Label Label as Label
Label as
Label Label
Text setting for Opening Text and Label Text setting for Opening Text and Label
Text setting for Opening Text and Label Text setting for Opening Text and Label
Right click to display the [Edit... Enter] menu and click
[Edit... Enter].
- Double click the desired character in the table or push
[Space] to pick up the character.
- Push [Enter] to finish editing. - Push [Enter] to finish editing.
Usable characters are listed below.
- You can use and make an original character that is
edited in the Character Editor Character Editor Character Editor Character Editor Screen.
24