Advertisement
Available languages
Available languages
Installation
1. Insert the trim inside the appliance's opening.
2. Press the trim in as far it will go to suit the wall finish
(to a maximum of 1/2" required non-combustible
board and 1/2" other material) and screw to the
frame using the deepest available screw hole (4
screws).
3. Place the cover plate in the space between the glass
and the trim. Align the round notch of the plate to
the hole in the support underneath as shown.
Note: Each end of the plate has a rounded notch
opening to insert the hinge pin of the side doors.
2
Align notch in plate
with hole underneath
4. Identify the left-hand door according to the images
below.
Left Door
Front
5. Insert the top hinge pin into the upper hole behind
the frame.
6. Lower the bottom hinge pin into the bottom hole.
7. Repeat for the right-hand door.
hinge
Insert hinge
pin
pin here
hinge pin
Insert hinge
pin here
Top of
door:
Longer
hinge pin
Bottom
of door:
Shorter
hinge pin
Rear
Insert hinge
pin here
Advertisement
