Cisco GoQAM Installation And Operation Manual page 91

13 Choose one of the following options:
 To provision the connectivity settings for a new IF GoQAM, go to step 14.

To adjust the connectivity settings for an existing IF GoQAM, go to step 15.
14 On the Set Up IF GOQAM window, click Apply.
Results:

The system saves the settings for the new IF GoQAM.

The Connectivity tab becomes sensitized.
Note: When you first provision the IF GoQAM, the Connectivity tab is accessible
only after you click Apply or Save from the Set Up IF GOQAM window.
Thereafter, the Connectivity tab is accessible for viewing or modification.
15 Click the Connectivity tab. The Set Up IF GOQAM window opens with the
Connectivity tab to the forefront displaying the Connectivity configuration
fields.
4004834 Rev D
Provision an IF GoQAM on the DNCS
75