Goqam Input Pairs - Cisco GoQAM Installation And Operation Manual

Modulator rf output and if output hardware
Table of Contents

Advertisement

Chapter 1 Introducing the GoQAM

GoQAM Input Pairs

The GoQAM associates the DVB ASI inputs as pairs of clear and encrypted inputs
for Overlay purposes. This means that each DVB ASI input constitutes a dedicated
pair of clear and encrypted streams. Each pair carries a clear digital broadcast stream
on one input and its encrypted form on the other input. For example, ASI IN 1 and
ASI IN 2 carry the clear and encrypted forms of the same digital transport stream,
respectively.
GoQAM Input Pairs Diagram
RF GoQAM Example
The following illustration depicts the fixed input and output combinations for an
RF GoQAM.
Note: For the RF GoQAM, input pair 1 can only be mapped to RF OUT 1, and input
pair 2 can only be mapped to RF OUT 3.
IF GoQAM Example
The following illustration depicts the fixed input and output combinations for an
IF GoQAM.
Note: For the IF GoQAM, input pair 1 can only be mapped to IF OUT 1, and input
pair 2 can only be mapped to IF OUT 2.
6
4004834 Rev D

Advertisement

Table of Contents
loading

Table of Contents