Cisco GoQAM Installation And Operation Manual page 167

Modulator rf output and if output hardware
Table of Contents

Advertisement

Environmental Requirements Table
Item
Operating Temperature
Storage Temperature Range
Operating Humidity
Vibration Susceptibility
Electrostatic Shock Susceptibility No damage sustained from five discharges of 15 KV IEC
4004834 Rev D
Specification
0° to 50°C (32° to 122°F)
CAUTION:
Avoid damage to this product! Your warranty is
void if you operate this product above the
maximum specified operating temperature.
Use caution when installing wiring and racks to
avoid obstruction of air flow into the side air
vents of the GoQAM, or out of the vent fans at
the GoQAM side panel.
Important: You must use the supplied notched rack
mounts (Cisco part numbers 734845 and 734846) to
mount the GoQAM in the rack. These rack mounts allow
correct air circulation through the unit.
-10° to 70°C (14° to 158°F)
5 to 95%, non-condensing
No data errors with a chassis vibration of 0.5 Gs. No data
errors with a vibration frequency of 10 to 400 Hz
electrostatic discharge model (150pF + 150 Ω) to all
exposed connections
Installation and Operation Requirements
151

Advertisement

Table of Contents
loading

Table of Contents