Factory Default Settings - Cisco GoQAM Installation And Operation Manual

Appendix A
Technical Specifications

Factory Default Settings

Factory Default Settings Table
The following table lists default settings for the GoQAM.
Value
Boot Mode
Carrier Mode
Encryption
ITUB Interleave
LCD Contrast
Modulation Type
RF Freq (RF GoQAM only)
IF Freq (IF GoQAM only)
RF Mute
RF Output Level
158
Factory Setting
2
Modulated
PowerKEY
128, 4
80%
ITUB 64
Highest Center Frequency Setting (867 MHz)
44 MHz
Off (the output is not muted)
IF GoQAM: +37 dBmV

RF GoQAM: +50 dBmV

4004834 Rev D