Cisco GoQAM Installation And Operation Manual page 162

Modulator rf output and if output hardware
Table of Contents

Advertisement

Chapter 8 Troubleshooting the GoQAM
Unable to
Download
Configuration File
from TFTP Server
146
Unable to TFTP Config File (Boot
Mode 1)
The following message appears when in boot
mode 1 and the GoQAM is unable to download
the configuration file from the TFTP server.
Problem with Config File
Continuing Startup...
The GoQAM then starts the application program.
Unable to TFTP Config File (Boot Mode 2)
The following message appears when in boot
mode 2 and the GoQAM is unable to download
the configuration file from the TFTP server.
Problem with Config File
Restarting...
The GoQAM then automatically reboots.
Verify that the
configuration
file
provisioned on
the DNCS is
present in the
DNCS File
system.
An incorrect
DNCS
configuration
may cause this
error
condition.
Contact
SciCare
Broadband
Services.
4004834 Rev D

Advertisement

Table of Contents
loading

Table of Contents