Cisco GoQAM Installation And Operation Manual page 41

Rack Requirements Table
Item
Rack Mount Type
Height
Width
Depth
Weight
Environmental Requirements Table
Item
Operating Temperature
Storage Temperature Range
Operating Humidity
Vibration Susceptibility
Electrostatic Shock Susceptibility
4004834 Rev D
Specification
EIA RS-310
1.75 in./44.45 mm
19 in./482.6 mm
22.5 in./571.5 mm
13.5 lb./5.4 kg
Specification
0° to 50°C (32° to 122°F)
CAUTION:
Avoid damage to this product! Your warranty
is void if you operate this product above the
maximum specified operating temperature.
Use caution when installing wiring and racks
to avoid obstruction of air flow. The
obstruction can occur at the side air vents of
the GoQAM or the vent fans at the GoQAM
side panel.
Important! You must use the supplied notched rack
mounts (Cisco part numbers 734845 and 734846) to
mount this modulator into the rack. These rack mounts
allow correct air circulation through the unit.
-10° to 70°C (14° to 158°F)
5 to 95%, non-condensing
No data errors with a chassis vibration of 0.5 Gs. No
data errors with a vibration frequency of 10 Hz to 400
Hz
No damage sustained from five discharges of 15 KV IEC
electrostatic discharge model (150pF + 150 Ω) to all
exposed connections
Install the Modulator Into a Rack
25