Cisco GoQAM Installation And Operation Manual page 61

Connectivity
The following table lists the Connectivity field descriptions.
Field
QAM Name
Headend Name
Device Type
Device Name
Port Number
Show TSIDs/IPs
Show (slot, port)
Legend
4004834 Rev D
Description
Identifies the name of the selected RF GoQAM and allows you
to specify the Input (ASI) Port (1 or 3)
Identifies the headend in which the input device exists
Identifies the type of input device, such as an Automux or IRT
to which the RF GoQAM is connected
Identifies the name of the input device to which the RF GoQAM
is connected
Identifies the port number of the device that is connected to the
RF GoQAM. The server should be entered in the DNCS as a
generic MPEG source. Create as many ports as are available for
the server and connect to the RF GoQAM
Displays the Transport Stream (TS) IDs and Internet Protocol
addresses (IPs)
Displays the slot and port of the card connected to the RF
GoQAM
Displays a group of icons that represent network elements that
may be displayed in the graphical drawing area
Understand the RF GoQAM GUIs
45