Cisco GoQAM Installation And Operation Manual page 131

Viewing the Encryption Mode
The Encryption Mode screen displays the current encryption mode setting. The
mode is saved in the NVRAM and is selected during the boot process. To display the
current encryption mode, complete the following steps.
1 Press OPTIONS until the Encryption Mode screen appears.
Press ENTER to return to the default screen.
2
Viewing the MAC Address
To view the MAC address used for GoQAM Ethernet communication, complete the
following steps.
Press OPTIONS until the MAC Address screen appears.
1
2 Press ENTER to return to the default screen.
Viewing the Netmask Screen
To display the currently assigned Netmask for all Ethernet communications,
complete the following steps.
1 Press OPTIONS until the Netmask screen appears.
Press ENTER to return to the default screen.
2
Viewing the IP Address
To display the currently assigned IP address for all Ethernet communications,
complete the following steps.
1 Press OPTIONS until the IP Address screen appears.
2 Press ENTER to return to the default screen.
4004834 Rev D
Monitor Setup Options
115