Cisco GoQAM Installation And Operation Manual page 55

Modulator rf output and if output hardware
Table of Contents

Advertisement

3
Select File > New > GOQAM > RF GOQAM. The Set Up RF GoQAM window
opens with the Basic Parameters tab to the forefront and displays the Basic
Parameters fields as shown in the following example.
Basic Parameters
The following table lists the Basic Parameters fields and their descriptions.
Field
Headend Name
QAM Name
IP Address
Modulation Type
4004834 Rev D
Description
Displays the name of the headend with which the modulator
is associated
Displays the name used for the modulator
Displays the IP address of the Ethernet interface through
which the DNCS manages and controls the modulator
Allows you to specify one of the following modulation types
for each of the carriers:
ITU J.83 Annex B (6 MHz)
ITU J.83 Annex C DAVIC/DVB
(6 MHz)
Note: The default value is ITU J.83 Annex B (6 MHz).
Understand the RF GoQAM GUIs
39

Advertisement

Table of Contents
loading

Table of Contents