Displaying And Debugging Ssh - 3Com Switch 7700 Configuration Manual

Figure 12
6 Click Browse to select the RSA private key file. Click OK.
7 Click Open to enter the SSH client interface. If it runs normally, you are prompted
to enter the username and password.
8 Enter the username and password and press Enter.
9 Log out of the SSH connection with the logout command.
Displaying and Run the display command in any view to view the operation of SSH and further to
Debugging SSH check the configuration result.
Run the debugging command to debug the SSH.
Perform the following configurations in any view.
Table 89 Display SSH Information
Operation
Display host and server public keys
Display client RSA public key
Display SSH state information and session
Display SSH user information
Enable SSH debugging
Disable SSH debugging
PUTTY Configuration for RSA Authentication
SSH Terminal Services
Command
display rsa local-key-pair public
display rsa peer-public-key [ brief | name
keyname ]
display ssh server { status | session }
display ssh user-information [ username ]
debugging ssh server { VTY index | all }
undo debugging ssh server { VTY index | all
}
379