3Com Switch 7700 Configuration Manual page 346

338 C 11: S
HAPTER YSTEM
M
ANAGEMENT
Enabling and Disabling Terminal Debugging
The Switch 7700 provides various ways for debugging most of the supported
protocols and functions.
The following switches control the outputs of debugging information:
The protocol debugging switch controls debugging output of a protocol.
■
The terminal debugging switch controls debugging output on a specified user
■
screen.
Figure 3 illustrates the relationship between two switches.
Figure 3 Debugging Output
Debugging
information
Protocol debugging
switch
Screen output
switch
You can use the following commands to control debugging.
Perform the following operations in user view.
Table 33 Enabling and Disabling Debugging
Operation
Enable the protocol debugging
Disable the protocol debugging
Enable the terminal debugging
Disable the terminal debugging
1
2
ON
OFF
1 3
OFF
Command
debugging { all [ timeout interval ] |
module-name [ debugging-option ] }
undo debugging { all | { protocol-name |
function-name } [ debugging-option ] }
terminal debugging
undo terminal debugging
3
ON
3
1
ON
1
3