3Com Switch 7700 Configuration Manual page 60

52 C 3: VLAN C
HAPTER ONFIGURATION
2 Configure VLAN 2 and VLAN 3 as protocol VLANs. Set VLAN 2 as IP 10.0.0.1
protocol and VLAN 3 as IP protocol
[SW7700-vlan2]protocol-vlan ?
at Specify AT(AppleTalk Protocol) configuration information
ip Specify IP(Internet Protocol) configuration information
ipx Specify IPX(Internetwork Packet eXchange) configuration
information
mode Specify other protocol mode configuration information
[SW7700-vlan2]vlan
[SW7700-vlan2]protocol-vlan
[SW7700-vlan2]protocol-vlan ip 10.0.0.1
[SW7700-vlan2]vlan 3
[SW7700-vlan3]protocol-vlan ip
[SW7700-vlan3]dis protocol-vlan vlan all
[SW7700-vlan3]dis protocol-vlan vlan all
VLAN ID: 2
VLAN Type: Protocol-based VLAN
Protocol-Index
0
VLAN ID: 3
VLAN Type: Protocol-based VLAN
Protocol-Index
0
3 Configure the protocol VLAN on port G1/0/1
[SW7700]int g1/0/1
[SW7700-GigabitEthernet1/0/1]port hybrid
[SW7700-GigabitEthernet1/0/1]port hybrid ?
protocol-vlan Specify current hybrid port's protocol-based VLAN
characteristics
pvid Specify current hybrid port's PVID VLAN
characteristics
vlan Specify current hybrid port's VLAN ID
[SW7700-GigabitEthernet1/0/1]port hybrid protocol
Protocol-Type
ip 10.0.0.1 255.255.255.0
Protocol-Type
ip