3Com Switch 7700 Configuration Manual page 308

300 C 9: AAA
HAPTER AND
RADIUS O
PERATION
Creating a Local User
A local user is a group of users set on NAS. The username is the unique identifier
of a user. A supplicant requesting network service may use local authentication
only if its corresponding local user has been added onto NAS.
Perform the following configurations in system view.
Table 15 Create/Delete a Local User and Relevant Properties
Operation
Add local users
Delete all the local users
Delete a local user by specifying its type
By default, there is no local user in the system.
Setting Attributes of a Local User
The attributes of a local user include its password, state, service type and other
settings.
Perform the following configurations in system view.
Table 16 Set the Method that a Local User Uses to Set Password
Operation
Set the method that a local user uses to set
password
Cancel the method that the local user uses to
set password
Auto means that the password display mode will be the one specified by the user
at the time of configuring a password (see the password command in the
following table for reference), and cipher-force means that the password display
mode of all the accessing users must be in cipher text.
Perform the following configurations in local user view.
Table 17 Set/Remove the Attributes Concerned with a Specified User
Operation
Set a password for a specified user
Remove the password set for the specified
user
Set the state of the specified user
Disable the state of the specified user
Set a service type for the specified user
Cancel the service type of the specified user
Command
local-user user-name
undo local-user all
undo local-user { user-name | all
[service-type {lan-access | ftp | telnet | ssh
}]}
Command
local-user password-display-mode {
cipher-force | auto}
undo local-user password-display-mode
Command
password {simple | cipher} password
undo password
state {active | block}
undo state {active | block}
service-type { ftp [ ftp-directory directory ] |
lan-access | ssh [level level | telnet [level
level ] ] | telnet [ level level | ssh [ level level ]
] }
undo service-type { telnet [ level | ssh [ lrvel ] ]
| ftp [ftp-directory] | lan-access | ssh [ level |
telnet [ level ] ] }