3Com Switch 7700 Configuration Manual page 161

Switch
Hide thumbs Also See for Switch 7700:
Table of Contents

Advertisement

A BGP peer must belong to a peer group. If you want to configure a BGP peer, you
need to first create a peer group and then add a peer to the group.
Table 93 Creating a Peer Group and Add a Member
Operation
Add a peer to the peer group
Delete a peer
If a peer is added to an IBGP peer group, the AS number cannot be specified in the
command.
When a peer group is defined with an AS number, all its member peers inherit that
AS number. If the AS number of the peer group is not specified, each peer added
to it should be specified with its own AS number. AS numbers of peers in a same
peer group can be different.
Configuring the State of a Peer/Peer Group
A BGP peer/peer group has two states: enable and disable. The BGP speakers do
not exchange routing information with a disabled peer or peer group.
Perform the following configurations in BGP view.
Table 94 Configuring the State of a Peer/Peer Group
Operation
Enable a peer/peer group
disable a peer/peer group
By default, a BGP peer or peer group is enabled.
When exchanging routing information between BGP speakers, the peer group
must be enabled first, and then the peer should be added to the enabled peer
group.
Configuring the Description of a Peer (Group)
The description of a peer or peer group can be added to facilitate learning the
characteristics of the peer .
Table 95 Configuring the Description of a Peer Group
Operation
Configure description of a peer (group)
Delete description of a peer (group)
By default, no BGP peer (group) description is set.
Configuring the Timer of a Peer (Group)
The peer timer command is used to configure timers of BGP peer (group),
including the keep-alive message interval and the hold timer. The preference of
Command
peer peer-address group group-name [
as-number as-number ]
undo peer peer-address
Command
peer { group-name | peer-address } enable
undo peer { group-name | peer-address }
enable
Command
peer { peer-address | group-name }
description description-line
undo peer { peer-address | group-name }
description
BGP
153

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents