3Com Switch 7700 Configuration Manual page 66

58 C 3: VLAN C
HAPTER ONFIGURATION
[SW7700-Ethernet1/0/1]
[SW7700-vlan3] vlan 4
3 Enable GVRP globally.
[SW7700-vlan4] quit
[SW7700] gvrp
4 Enable GVRP on the trunk port.
[SW7700] interface Ethernet 1/0/1
[SW7700-Ethernet1/0/1] gvrp
Configure Switch B:
1 Set Gigabit Ethernet2/1 as a trunk port and allow all the VLANs to pass through.
[SW7700] interface Ethernet 2/0/1
[SW7700-Ethernet2/0/1] port link-type trunk
[SW7700-Ethernet2/0/1] port trunk permit vlan all
2 Enable GVRP globally.
[SW7700-Ethernet2/0/1] quit
[SW7700] gvrp
3 Enable GVRP on the trunk port.
[SW7700] interface ethernet 2/0/1
[SW7700-Ethernet2/0/1] gvrp
vlan 3