12
C
1: S
A
HAPTER
YSTEM
CCESS
Configuring the User
Interface
Figure 11 Set the Dialed Number
Figure 12 Dial the Remote PC
4 Enter the preset login password on the remote terminal emulator and wait for the
prompt.
<SW7700>
5 Use the appropriate commands to configure the Switch 7700 or view its
operational state. Enter
command, refer to the appropriate chapter in this guide.
By default, after login, a modem user can access the commands at Level 0.
User interface configuration is another way to configure and manage port data.
The Switch 7700 supports the following configuration methods:
Local configuration through the console port
■
Remote configuration through Telnet on the Ethernet port
■
to get immediate help. For details on a specific
?
Need help?
Do you have a question about the Switch 7700 and is the answer not in the manual?