3Com Switch 7700 Configuration Manual page 87

The following table shows some common service types and their values:
Table 34 Service Types and Their Values
Service Type
Unknown
Print Queue
File Server
Job Server
Print Server
Archive Server
Remote Bridge Server
Advertising Print Server
Reserved
Wildcard
Configuring the Maximum Length of the Service Information
Reserve-Queue for One Service Type IPX supports up to 10240 service
entries with 5120 service types and 5120 static service entries at most. You can
configure the maximum service entries for one service type.
Perform the following configuration in system view.
Configuring the Maximum Length of the Service Information
Table 35
Reserve-Queue for one Service Type
Operation
Configure the maximum length of the service
information reserve-queue for one service
type
Restore the default maximum length of the
service information reserve-queue for one
service type
By default, the maximum length of the service information reserve-queue for one
service type is 2048.
If the length of the service information reserve-queue that you configure is less
than the original one, the current service entries are not deleted. And if the
number of the service entries of the same type reaches the specified value, new
service information is not added.
Configuring IPX Forwarding
Use the information in the following sections to configure IPX forwarding.
Configuring Triggered Update in IPX
■
Configuring Split Horizon of IPX
■
Configuring the Encapsulation Format of the IPX frame
■
Configuring for Forwarding Type 20 IPX Broadcast Packets
■
Configuring Triggered Update in IPX IPX RIP and SAP periodically broadcast
update. If the periodical broadcast is not desired, you can enable triggered update
IPX Configuration
Value
0000h
0003h
0004h
0005h
0007h
0009h
0024h
0047h
Up To 8000h
FFFFh (-1)
Command
ipx sap max-reserve-servers length
undo ipx sap max-reserve-servers
79