Managing Devices; Rebooting The Switch 7700; Designating The App For The Next Boot - 3Com Switch 7700 Configuration Manual

334 C 11: S
HAPTER YSTEM

Managing Devices

Rebooting the Switch
7700
Designating the APP for
the Next Boot
M
ANAGEMENT
00-e0-fc-17-a7-d6
00-e0-fc-5e-b1-fb
00-e0-fc-55-f1-16
With device management, the Switch 7700 displays the current state and event
debugging information about the slots and physical devices. In addition, there is a
command for rebooting the system when a function failure occurs.
Configuring the Managing Devices is described in the following sections:

Rebooting the Switch 7700

■

Designating the APP for the Next Boot

■
Displaying Devices
■
Perform the following configuration in user view.
Table 21 Rebooting the Switch 7700
Operation
Reboot the Switch 7700
In the case that there are several operational images in the flash memory, you can
use this command to designate the operational file (*.app) to use when the Switch
7700 is booted.
Perform the following configuration in user view.
Table 22 Designating the APP for the next boot
Operation
Designate the APP for the next boot
Tasks for designating the APP for the next boot are described in the following
sections:
Upgrading BootROM
■
Resetting a Slot
■
Setting the Slot Temperature Limit
■
Setting the Backboard View
■
Upgrading BootROM
You can use this command to upgrade the BootROM with the BootROM program
in the flash memory. This configuration task facilitates the remote upgrade. You
can upload the BootROM program file, from a remote end to the switch, by FTP
and then use this command to upgrade the BootROM on the modules.
Perform the following configuration in user view.
Table 23 Upgrading BootROM
Operation
Upgrade BootROM
1 LearnedEthernet1/0/2
1 Learned Ethernet1/0/2
1 Learned Ethernet1/0/2
Command
reboot
Command
boot bootloader file-url
Command
boot BootROM file-url
300
300
300