3Com Switch 7700 Configuration Manual page 335

FTP Server configuration includes tasks described in the following sections:
Enabling and Disabling the FTP Server
■
Configuring the FTP Server Authentication and Authorization
■
Configuring FTP Server Parameters
■
Displaying and Debugging the FTP Server
■
Introduction to FTP Client
■
Enabling and Disabling the FTP Server
You can use the following commands to enable or disable the FTP server. Perform
the following configuration in system view.
Table 8 Enable/Disable FTP Server
Operation
Enable the FTP server
Disable the FTP server
The FTP server supports multiple user access. A remote FTP client sends a request
to the FTP server. Then, the FTP server carries out the corresponding operation and
returns the result to the client.
By default, the FTP server is disabled.
Configuring the FTP Server Authentication and Authorization
You can use the following commands to configure FTP server authentication and
authorization. The authorization information of the FTP server includes the top
working directory provided for FTP clients.
Perform the following configuration in system view.
Table 9 Configure the FTP Server Authentication and Authorization
Operation
Create new local user and enter local user
view (system view)
Delete local user (system view)
Configure password for local user (local user
view)
Configure service type for local user (local user
view)
Cancel password for local user (local user
view)
Cancel service type for local user (local user
view)
Only clients who have passed the authentication and authorization successfully
can access the FTP server.
File System
Command
ftp server enable
undo ftp server
Command
local-user username
undo local-user [ username | all [
service-type ftp ]]
password [ cipher | simple ] password
service-type ftp ftp-directory directory
undo password
undo service-type ftp [ftp-directory]
327