Dhcp Relay - 3Com Switch 7700 Configuration Manual

Switch
Hide thumbs Also See for Switch 7700:
Table of Contents

Advertisement

64
C
4: N
HAPTER
ETWORK

DHCP Relay

P
O
ROTOCOL
PERATION
Displaying and Debugging ARP
After the previous configuration, execute
the operation of the ARP configuration, and to verify the effect of the
configuration. Execute the debugging command in user view to debug the ARP
configuration.
Table 7 Display and Debug ARP
Operation
Display ARP mapping table
Display the current setting of the dynamic ARP
map aging timer
Enable ARP information debugging
Disable ARP information debugging
By default, all ARP mapping entries of the Ethernet switch are displayed.
Dynamic Host Configuration Protocol (DHCP) offers dynamic IP address
assignment. DHCP works in Client-Server mode. With this protocol, the DHCP
Client can dynamically request configuration information and the DHCP server can
configure the information for the Client.
The DHCP relay serves as conduit between the DHCP Client and the server located
on different subnets. The DHCP packets can be relayed to the destination DHCP
server (or Client) across network segments. The DHCP clients on different
networks can use the same DHCP server. This is economical and convenient for
centralized management.
Figure 2 DHCP Relay Schematic Diagram
Switch
Switch
When the DHCP Client performs initialization, it broadcasts the request packet on
the local network segment. If there is a DHCP server on the local network segment
(e.g. the Ethernet on the right side of the figure), then the DHCP can be
configured directly without the relay. If there is no DHCP server on the local
network segment, DHCP relay will process the received broadcast packets and
forward them to remote DHCP servers. The server configures the clients based on
the information provided in the DHCP request packet and in the server setup.
command in all views to display
display
Command
display arp [ ip-address | [ static | dynamic ] [
{ begin | include | exclude } text ] ]
display arp timer aging
debugging arp { packet | status }
undo debugging arp { packet | status }
Intranet
Intranet
DHCP client
DHCP client
DHCP server
DHCP server

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents