Registering Av Devices - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Opening the menu
MENU
OK
AV devices
select
Connect as follows:
connect
OK
and clear
Videorecorder
OK
EXIT

Caution! Connection of a
new device may cause an
existing connection dia-
gram to be changed. If so,
you must reconnect the AV
devices accordingly.
84

25. Registering AV Devices

AV (audio/video) devices are external devices
which deliver video and/or audio signals (such
i
as video recorders, DVD players, DVD recor-
ders, etc.) and which can be connected to TV
sets.
All commonly available AV devices are listed in
the menu "AV devices".

SVHS/Hi8 and Data Logic video recorders must always
be connected to the EURO1 socket of the TV set.
In the factory, the EURO1 socket is programmed
for a video recorder and the EURO2 socket is pro-
F1
Other device 3
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.3
DVD/Videorec.2
✗
DVD/Videorec.1
VCR
CVBS
• Press numeric key
select the appropriate signal types (OUT/IN) for
this device and press "OK" to confirm your
selection. For details of the signal types, see
page 66 and the operating instructions for the
AV device being connected.
• If desired, press numeric key
rent name for this AV device and press "OK".
• Use the cursor control key to select "Connect"
and press the "OK" key. Then connect the AV
device to the corresponding EURO socket.
Note that you must always connect AV
devices exactly as shown in the connection
diagram in the TV menu of your TV set !
grammed for a DVD player.
Registering an AV device on
the TV set
• Press the "MENU" key to
open the TV menu.
DataLogic
TV-SPDIF input
• Press the yellow key
Name
open the menu "AV devi-
Signal types
ces".
connect
• Use the cursor control key
to select the AV device you
➔
wish to register and press
CVBS EURO1
the "OK" key.
·
and use the - + key to
»
, enter a diffe-
to