Collecting Epg Data - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

NexTView data
8)
various broadcasting organizations.
DVB-SI data is broadcast by each chan-
nel corresponding to its own content.
Information may therefore correspon-
dingly vary.
Switch on your TV, so that EPG data can
be compiled and/or updated. While
data is being compiled the green LED is
lit.
TV sets with one receiver unit:
• If a NexTView slot
Switch the TV to standby mode, using
the mains key on your remote.
• If no NexTView slot
only DVB-SI details can be received:
switch the set to standby.

After switching on the TV, data
compilation will continue stop until
it is switched to standby again.
TV sets with two receivers:
The TV set collects EPG data via the
second receiver, provided that the EPG
station has also been stored there. For
example: The EPG station (e.g. Kabel 1)
can be received via DVB-T or DVB-C (1st
receiver) and via DVB-S (2nd receiver)
Not possible with an external receiver !

20.2 Collecting EPG data

is transmitted by
has been set:
8)
has been set and
8)
Special notes:
The TV set's channel table lists all availa-
ble channels in the programme guide,
provided you do not make another selec-
tion in the channel table menu.
Channels broadcasting on a time-shared
basis – e.g. arte/Kinderkanal – must be
saved in separate programme slots (see
24). If you include all channels in the
EPG, you won't be able to see very far
ahead.
You can decide which channels should
appear in the EPG programme guide.
As a rule, the collection process gathers
data for all free channels. The following
options are available to exclude selected
channels from the EPG programme gui-
de:
Solution 1:
• Press the MENU key. The TV menu
appears on the screen.
• Press the white key
nel table appears with the active pro-
gramme slot selected.
• Press F2 to permit editing of the chan-
nel list.
• Press to switch to the menu page.
• Using and
in EPG" and dedeselect rows marked
(x) with OK.
• To exclude other channels from the EPG
programme guide, use
to select the channel and
repeatthe procedure.
. The menu chan-
select "Include channel
and
59