Manual Dvb-C Station Search - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Opening the menu
MENU
Configuration
Start station
Channel
search with .
OK
Frequency
Madulation Auto.mode
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
74
22.3 Setting Stations
For a manual station search, you must know the
channel number or the frequency of the station you
wish to find.
Executing the manual search
• Press the "MENU" key to open the TV menu.
• Press the red key
"Configuration".
• Use the corresponding numeric key (in the
example:
F1
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S General settings
Analog-TV Manual search
Country Automatic search
Language
Search settings
Operating
05 Cable channel
64.500MHz Symbol rate
Start station search
• In the setting window, use the numeric keys to
enter the channel number (or special channel
number) or the frequency of the desired station.
If you know further data of the desired station,
select the menu items "Modulation" and "Symbol
rate" and use the - + key or the numeric keys to
change the settings there.
• After input of the station data, use the cursor
control key to select the menu item "Station
search" and press the "OK" key to confirm your
selection.
The station settings are saved.

Manual DVB-C station search

to open the menu
) to select "DVB-C".
• The cursor is on the menu
line "Search settings".
• Press the "OK" key and, in
the setting window, use the -
+ key to select "All", "FTA
only" or "FTA +CICAM" (see
also page 67).
• Press the "OK" key and use
the corresponding numeric
Antenna
key (in the example:
--
select "Manual search".
6900
• The cursor points to
"Channel".
) to