Setting Stations, Search Settings - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Calling the menu

Section 22.5 only in the case of corresponding equipment or conversion.
MENU
Configuration
Change with
– +
Accept value with .
OK
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
78
Before executing a DVB station search, you must
make the appropriate search settings.
Depending on the features installed in the TV set
and your personal requirements, you can make
the following settings:
All = search for all stations on the selected satelli-
FTA only = search only for unencrypted (free-to-
Function for F2
Function for F1
EURO sockets
DVB-C
Automatic search
DVB-T
DVB-S
Analog-TV
Country
Language
Operating LNB supply voltage
Stations Free-to-air only
• Press the appropriate numeric key (in this exam-
ple
• Press the appropriate numeric key (in this exam-
ple
• Use the - + key to select the desired setting.
• Press the Ok key to confirm the new setting.
• Press the EXIT key to close the TV menu.
22.5 Setting the stations
Search settings
te.
air) stations on the selected satellite.
FTA (CI) = search for all FTA
General settings
Manual search
The menu item "FTA (CI)" is
available only if a CI module
Search settings
Satellit B
has been installed and a CA
Astra 19,2°
module is plugged into it.
DiSEqc system
Making the search settings
• Press the MENU key to open
the TV menu.
• Press the red key
the menu "Configuration".
to select "DVB-S".
to select "Search settings".
stations and sta-
tions which can be
received with the CI
module.
to open