Automatic Dvb-C Station Search - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

22.3 Setting Stations

Automatic DVB-C station search

The DVB-C station search operation searches the
entire frequency band for TV and radio stations.
All stations which are found are placed in separa-
te TV and radio station tables. See Section 29 for
details of DVB radio mode.
If you are not satisfied with the order in which the
stations are displayed, you can move them to
other positions or delete unwanted stations (see
Section 24., "Sorting stations".
Executing the automatic
search
• Press the "MENU" key to
open the TV menu.
• Press the red key
the menu "Configuration".
• Press the numeric key
select "DVB-C".
• The cursor is now on the
menu line "Search settings".
• Press the "OK" key and, in
the setting window, use the -
+ key to select "All", "FTA
only" or "FTA +CICAM" (see
also page 67).
• Press the "OK" key and then press the corres-
ponding numeric key (in the example:
select "Automatic search". The cursor is now on
the line "Symbol rate 1".

The most common symbol rates are already
preset. Usually these settings do not need to
be modified. If the symbol-rate settings do
not yield the desired result, set other sym-
bol rates and save them by pressing "OK".
Ask your cable operator for details.
• Press the cursor control key
line "Start station search".
• Press the "OK" key to start the search. The TV
set now searches for available stations.
to open
to
Configuration
Start station
search with
OK
·
to select the menu
Opening the menu
F1
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
Symbol rate 1
3)
.
Symbol rate 2
Symbol rate 3
) to
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
MENU
General settings
Manual search
Automatic search
Search settings
6900 Precision search
6875 Start station search
OK
73
off