Picture Settings For Progr. Via Station Table - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

11.2 Picture Settings for
Programme via Station Table
Individual picture settings for
programme position xy:
• Select the programme position whose picture
settings you wish to change.
• Press the "MENU" key.
The TV menu appears on the screen.
• Press the white key
played with the currently active programme
position highlighted.
• Press the F2 key to enable editing of the station
table.
• Press the cursor control key
to move to the subject
side.
• Use the corresponding
numeric keys (in this exam-
´
ple: for the picture quali-
ty) to select the desired
menu items.
• In the setting window, use
the cursor control key to
select the desired function.
• Use the - + key to change the setting.
"gen." means here that the new setting will
overwrite the related general picture setting (see
pages 18 and 20).

The individual settings made here which
differ from the general settings remain
saved.
• Press the "OK" key to save the new settings.
• Press the "EXIT" key to close the TV menu.
3) See glossary for an explanation.
5) Available only for DVB stations!
7) Available only for analogue stations!
. The station table is dis-
Station table
Change with
– +
Accept value with
OK
Opening the menu
MENU
F2
F1
0010 Hessen 3
0009 Südwest
0008 MDR
0007 PRO 7
0006 RTL 2
0005 RTL
0004 SAT 1
0003 Bayern 3
0002 ZDF
0001 ARD
Picture sharpness gen.
VCR off
OK
EXIT
The number of subjects and sections depends on
the selected scope of operation. Depending on
the configuration of the TV set, the various menu
items may be displayed in a different order and
numbered differently.
5) Available only for DVB stations!
7) Available only for analogue stations!
´
Sound corrections
Colour standard 3)7)
Picture quality
Picture correct.
Enter logo
✗
Station contained in EPG
CA module
5)
Signal quality
5)
DVB-prog. info
5)
Frequency/channel 7)
Noise reduction gen.
Colour offset 0
25