Special Functions; Picture-In-Picture - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

17. Special Functions

Picture-in-Picture

In the case of TV sets with two receivers, it is pos-
sible to display a DVB channel and to open a win-
dow to show a different analogue channel from
the second receiver or from the AV channel slot.
Activating the PIP function
• The F1 key is pre-programmed with
the picture-in-picture function.
• You can use the cursor control keys
to move the PIP picture on the
screen. The last position to which this
picture was set is saved.
• By pressing the "OK" key, you can set
the frame of the PIP picture to active
(red) or inactive (white).
• The contents of the PIP picture can be
changed only if its frame is active
(red).
• By using the numeric keys or the "P+/P-" rocker
switch, it is possible to select a different AV
channel slot or an analogue channel from the
second receiver.
If you wish to display the picture from a connected
AV device as a picture-in-picture, press the "AV"
key and then use the numeric keys to select the
desired AV device.
If you wish to display the picture from another sta-
tion, use the numeric keys to select the desired
programme position.
• Pressing the red key
the two pictures.
• Pressing the green key
to expand to fill the screen and terminates the
PIP function.
• To close the PIP picture, press the "EXIT" key.

If a recording has been programmed in the
timer menu, activating the PIP function
displays the programme which is being
recorded.
swaps the contents of
causes the PIP picture
Opening the menu
F1
EXIT
43